Buttons problem - Printable Version +- Logic Machine Forum (https://forum.logicmachine.net) +-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1) +--- Forum: Visualization (https://forum.logicmachine.net/forumdisplay.php?fid=9) +--- Thread: Buttons problem (/showthread.php?tid=1229) |
Buttons problem - tpospichal - 10.02.2018 Hello i have problem in Visualization. When I have button for light control (main object is 1bit ,stasus object is 1bit signal from Actuator rele feedback) in case i try push button directly from editor, everything works fine, toogle works 0 1 0 1 0 1, but when i use same visualization directly over web page toogle sending only 0 0 0 0 0 so light never goes on... Where is the problem? Thank you RE: Buttons problem - Erwin van der Zwart - 10.02.2018 If you have a HL or SL you probably running FW 2.1.0, please update to 2.1.1 BR, Erwin RE: Buttons problem - tpospichal - 11.02.2018 (10.02.2018, 16:12)Erwin van der Zwart Wrote: If you have a HL or SL you probably running FW 2.1.0, please update to 2.1.1 Thank you wery much! It helps! RE: Buttons problem - manos@dynamitec - 16.05.2018 Hello, I am having exactly the same problem but in my case the hardware is a LM5Lp version 20170927. Have tried different browsers and OS also Android but with the same result . The Project originally was created on an HL (at the office) and restored on site on the LM5Lp. I have managed to make it work only by refreshing the page every time but this is not the solution I am looking for. Is there something to fix this problem? All the rest is working fine, including scripts and schedules. Regards, RE: Buttons problem - admin - 16.05.2018 Use this update package (LM > Utilities > Install updates): https://dl.openrb.com/lmup/2017.10.24-status-v2.lmup Clear browser cache after installation. RE: Buttons problem - manos@dynamitec - 16.05.2018 Hello Admin, Thank you for the quick reply. It definitely solved my problem . Regards, |