This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

recovery img Spacelink HW V3.2?
#1
Can you share the recovery image of the spacelink lss100200. I have a spacelink with both green LEDs blinking and the internal red LED blinking at the same.

Attached Files Thumbnail(s)
   
Reply
#2
Here you go, don't forgot to extract before usage

Attached Files
.gz   recovery-imx6-1g.img.gz (Size: 5.49 MB / Downloads: 24)
Reply
#3
Thank you very much, it works correctly.
Reply
#4
For HW: V3.1 Can I recover the same image?
Reply
#5
Yes when having a HW 2 or 3 it should work (imx6)
Reply
#6
(16.01.2024, 21:34)Erwin van der Zwart Wrote: Yes when having a HW 2 or 3 it should work (imx6)

Hi Erwin
Can I use same recovery in SpaceLynk and Wiser ?
I need to recover several Wiser
Reply
#7
Use our recovery works on every hardware. Just make sure select correct CPU version.
https://kb.logicmachine.net/misc/reflash...ng-player/
------------------------------
Ctrl+F5
Reply
#8
(06.02.2024, 16:01)Daniel Wrote: Use our recovery works on every hardware. Just make sure select correct CPU version.
https://kb.logicmachine.net/misc/reflash...ng-player/

Thank you
Now they all run again
Reply


Forum Jump: