Posts: 9
Threads: 3
Joined: Apr 2016
Reputation:
0
Hi everybody,
I'm looking for a solution to separate one data int64 into two data int32, in the aim to send energy from a smartlink (int64) via bacnet (int32).
In the device wich receive the two point int32 via Bacnet, i will aggregate this two points to reach the original value.
Thanks,
Best regards
Hubert FEBRAUD
Home automation integrator
Connectibat, Nantes, France
Posts: 7720
Threads: 42
Joined: Jun 2015
Reputation:
446
Which device are you using? Latest LM firmware supports int64 in BACnet.
Posts: 9
Threads: 3
Joined: Apr 2016
Reputation:
0
(05.08.2020, 08:11)admin Wrote: Which device are you using? Latest LM firmware supports int64 in BACnet.
It's a Wiser for KNX in 2.4.0
Hubert FEBRAUD
Home automation integrator
Connectibat, Nantes, France
Posts: 4572
Threads: 23
Joined: Aug 2017
Reputation:
206
There is a fix for this, you can send the whole int64.
https://dl.openrb.com/lmup/2020.07.14-bacnet-64bit.lmup
You may need latest fw for wiser 2.5.1
------------------------------
Ctrl+F5
Posts: 9
Threads: 3
Joined: Apr 2016
Reputation:
0
Thanks everybody, it works fine.
Solution : firmware 2.5.1 with patch is OK
I hope this can help someone else.
BR
Hubert FEBRAUD
Home automation integrator
Connectibat, Nantes, France
Posts: 1759
Threads: 6
Joined: Jul 2015
Reputation:
115
Aahhh, yep your right 4x8 = still 32 (:
Sorry missed that on my free day (:
Posts: 4572
Threads: 23
Joined: Aug 2017
Reputation:
206
Admin has a free week
------------------------------
Ctrl+F5
Posts: 1759
Threads: 6
Joined: Jul 2015
Reputation:
115
He deserves it!
And he is always sharper then me so that’s not an excuse (:
BR,
Erwin