Posts: 4253
Threads: 21
Joined: Aug 2017
Reputation:
183
(08.05.2024, 06:44)davidchispas Wrote: Hello, I can't link the LM bridge with the home app. I scan the QR and after several minutes it mentions that the accessory was not found.
Which firmware and what homekit app version?
------------------------------
Ctrl+F5
Posts: 7411
Threads: 41
Joined: Jun 2015
Reputation:
423
Post what you have in Homekit app logs (click the file icon).
Posts: 7411
Threads: 41
Joined: Jun 2015
Reputation:
423
Nothing relevant in the logs unfortunately. What about LM Error logs?
Posts: 257
Threads: 33
Joined: Apr 2019
Reputation:
2
Hello,
I have a question about the functionality of the devices I've set up. It's a very simple installation where I've created controls for lights, exterior door openings, and scene activations.
For lighting, the type of control is clear, using either simple light devices or dimmable ones for adjustable lights. However, I have a problem with the door opening. The device enabled in HomeKit is a scale type, but my control is simple and I've registered it as a simple output device. Similarly, for executing scenes created in LM, I'm using the simple output device.
My client has registered the devices in the Home app and distributed them in different rooms. However, when they send the command to turn on the lights, it triggers everything, including scenes, doors, and lights.
What could I be doing wrong?
Posts: 4253
Threads: 21
Joined: Aug 2017
Reputation:
183
It is hard to say from your description but log all the objects and track where from the trigger is coming from.
------------------------------
Ctrl+F5
Posts: 6
Threads: 0
Joined: Jul 2023
Reputation:
0
10.06.2024, 10:58
(This post was last modified: 10.06.2024, 11:05 by Ranjeet.)
We Are using K-Box For Air Conditioning and configured in MOSIAC app with KNX HVAC Object which is working Properly. But when we are configuring with Homekit with same KNX Object Only On/Off is working set point ,operating Mode,fan Speed is not working properly. we Tried In both Heater/Cooler and Thermostat
Posts: 4253
Threads: 21
Joined: Aug 2017
Reputation:
183
Please read the specification in the begging of thread to understand how each object must work. Apple made it based on Zigbee so some object might have strange requirements.
------------------------------
Ctrl+F5