Firmware 2015.09.17 LM4

[JMM]

Hi,

There is not secondary HTTP service anymore ???

JMM.

[Sandstrand]

I too would like to know this since we use the secondary http server.

Are there any releasenotes with all the changes for the new firmware?

[admin]

You can now upload files which are accessible through the main web server via FTP. In System config > Services > FTP server you have to enable the FTP server and set password for apps user. Then you can upload files into user directory which can then be accessed at http://IP/user. You can enable or disable password auth for this directory in Logic Machine > User access > User access settings.

[JMM]

Hi,

With the old firmware the file address of ftp was HTTP://192.168.1.10:8080/knx/xxxxx.html
Now with the new firmware which is the address ?

JMM

[admin]

The URL will look like this if you upload knx folder into user folder via FTP:
HTTP://192.168.1.10/user/knx/xxxxx.html

[JMM]

Is not ok,

It is necessary to create user folder ?
When I upload to the ftp server, the directory 'user' does not exist
just my knx folder.

[admin]

You are probably using ftp login, but you must use apps login for files that should be visible from the web server. Please follow the steps in my post above.

[JMM]

Well is OK !

Thank you

JMM

[JMM]

Hi,

For some time I have no more access to the port 21 of the LM4 by ftp client " refused access ".

Sever status enabled OK
Username FTP OK
Password  FTP OK
Username apps OK
Password apps OK

When I scan the IP address of the LM the port 21 is closed, every other one are opened (22 80 81 443 444 3333).

Have you an idea?

JMM.