+- LogicMachine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Visu (https://forum.logicmachine.net/forumdisplay.php?fid=24)
+--- Thread: blind control on Visu (/showthread.php?tid=6272)
Pages:
1
2
blind control on Visu - toujour - 26.01.2026
Hi, what is the better way to control a blind from the new Visu ?
When I use this control
I have a problem with the slats ( I think the bit stop doesn't work properly. I can't open and close slats by singol tap on the button.....the stop is always in the same direction).
BR,
Alberto
RE: blind control on Visu - Daniel - 26.01.2026
This was designed for window/blind actuator. What is the difference for the shutters?
RE: blind control on Visu - toujour - 26.01.2026
With the shutters the bit stop always works (0 or 1 value).
With the blinds the bit stop has a sense ( 0 --> open slats by one step , 1 --> close slats by one step ).
for example there are 10 steps to open/close the slats completely
The best think is with short and long command (is it possible ?...or I have to use javascript).
Otherwise...How can I change the value of the stop ?
RE: blind control on Visu - Daniel - 26.01.2026
Why don't you use byte control instead?
RE: blind control on Visu - toujour - 27.01.2026
because it has one more tap for use ....and vertical slide is not good in plant (too big) because I have 4 motors for every windows
RE: blind control on Visu - toujour - 09.02.2026
one think.....I'm using the step control (it is good with long and short !!) but I have a problem.
I have the central stop button changes state by the Movement status
I think the change active state could be at the up/down button and not on the stop button (or their could change by the position status).
am I doing something wrong?
BR,
Alberto
RE: blind control on Visu - Daniel - 09.02.2026
It shows what is the active state, if blinds move then the left/right is highlighted if stop then the middle.
RE: blind control on Visu - toujour - 09.02.2026
ok, but I don't see the final status of the blind....closed or opened ?
RE: blind control on Visu - Daniel - 09.02.2026
It is not about blind status, it is about, is it moving or did it stop. There is position status object which can display position in %, use icon and value.
RE: blind control on Visu - toujour - 02.04.2026
Hi,
is it possible insert an option that send the stop when I release the button ?
RE: blind control on Visu - admin - 02.04.2026
Do you mean when short/long press option is enabled?
RE: blind control on Visu - PolymorphedCust - 20.04.2026
Is there no widget on Visu that displays in graphic, what stage the blinds are? In Mosiac we could choose whether it was sideways or up/down.. Now we only got 3 buttons (up, stop, down). No % indication of blind stage.. ?
RE: blind control on Visu - admin - 20.04.2026
You can attach Position status object to the widget. In Plan view you can use additional icons to display a different icon depending on the status value.
RE: blind control on Visu - PolymorphedCust - 20.04.2026
But not in Tile View?
RE: blind control on Visu - Daniel - 20.04.2026
Show value on the opposite side of widget's title
RE: blind control on Visu - PolymorphedCust - 20.04.2026
Yeah, okay. But no graphical feedback.. Thanks for the answer
Is it possible to lock the menu on the left, så that it always is visible?
RE: blind control on Visu - Daniel - 20.04.2026
See General settings - Menu display
RE: blind control on Visu - PolymorphedCust - 20.04.2026
Sorry, I dont see that?...
RE: blind control on Visu - Daniel - 20.04.2026
This is option for Plan, for Tile this is set to auto hide otherwise you will see nothing on mobile.
RE: blind control on Visu - toujour - 21.04.2026
(02.04.2026, 11:31)admin Wrote: Do you mean when short/long press option is enabled?
yes