+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Scripting (https://forum.logicmachine.net/forumdisplay.php?fid=8)
+--- Thread: Art-Net DMX (/showthread.php?tid=1391)
Pages:
1
2
RE: Art-Net DMX - lcrowhurst - 06.02.2020
(04.02.2020, 13:09)admin Wrote: You can run the sending script on the same device. Just set IP to 127.0.0.1
Thanks that works perfectly, now to get an art net to dmx converter to test with. Once again thank you so much for your help
RE: Art-Net DMX - lcrowhurst - 07.09.2020
I finally installed at the clients site, Using an Enttec DMX to Artnet. The script works well for presets , ie setting dmx 1 to 255, however if a slider is used eg sliding up from 0 to 255, where eg value 1,5,7,10,14 etc are sent out, the shac(LM) has trouble keeping up with all the packets of data being sent. This results in at first the light matching the slider but very quickly it starts lagging, so by the time the slider reaches 255, it may be a few second before the shac(LM) changes the light level to 255. Is there any way of speeding up the script?