+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Visualization (https://forum.logicmachine.net/forumdisplay.php?fid=9)
+--- Thread: Mosaic button to send (0) (/showthread.php?tid=1482)
Mosaic button to send (0) - Kai-Roger - 10.07.2018
Hi.
I want to send a zero (0) to a group adress on the KNX bus via a buttonpress on a widget i the Mosaic App. I seems like all the buttons/widgets have toggle functions, and can't be configured to send ether a (1) or a (0) to the bus. Is it something i misunderstand here, or is it just not possible?
Kai-Roger
RE: Mosaic button to send (0) - Daniel - 11.07.2018
Hi
This was already asked few times and the answer was no. You could try with dedicated object and then script behind which would always send your value to another object. Not nice but would work. I will push on our side to add this functionality.
BR
RE: Mosaic button to send (0) - Kai-Roger - 11.07.2018
(11.07.2018, 07:29)Daniel. Wrote: Hi
This was already asked few times and the answer was no. You could try with dedicated object and then script behind which would always send your value to another object. Not nice but would work. I will push on our side to add this functionality.
BR
Thanks for the reply. I hope this will be added soon.
Kai-Roger