+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: Port USB LogicMachine connected to 3G/4G Modem Router (/showthread.php?tid=1548)
Port USB LogicMachine connected to 3G/4G Modem Router - batistacaceres - 23.08.2018
Its possible programming an KNX installation connecting one USB 3G/4G Modem Router to the USB port in LogicMachine?. For Example (Huawei E355 GSM/3G/4G Mobile Hotspot Router Modem, connected to LogicMachine USB port, and that LogicMachine supply us KNXNetIP protocol, to program an knx instalation using the ETS.
best regards
RE: Port USB LogicMachine connected to 3G/4G Modem Router - edgars - 23.08.2018
USB 3G dongle can be used in LM as SMS send/receive transmitter. No 3/4G router functionality.
We have made LogicMachine with 3G modem on-board. In this case it acts as router. And if your GSM provider assigns you public IP, you can use it to connect remotely and configure your KNX network. More info on this LM will follow shortly.
RE: Port USB LogicMachine connected to 3G/4G Modem Router - batistacaceres - 23.08.2018
(23.08.2018, 10:17)edgars Wrote: USB 3G dongle can be used in LM as SMS send/receive transmitter. No 3/4G router functionality.
We have made LogicMachine with 3G modem on-board. In this case it acts as router. And if your GSM provider assigns you public IP, you can use it to connect remotely and configure your KNX network. More info on this LM will follow shortly.
Thank you very much, I will appresiate a lot that device, I hope it comming soon.
best regards