+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: Modbus TCP coil issue (/showthread.php?tid=1566)
Modbus TCP coil issue - eirik - 30.08.2018
Hi
I've some trouble with a modbus profile.
When I map a coil-register to a bool object this error message appears in log:
All other registers, holdingreg, inputreg and discreteinput from device works, but not the coil.
This is the profile:
There are only two coils in the register on this device:
This is a modbus TCP-device, and LM5-version is 20180523.
Could anyone point me in the right direction here, or give me a feedback on any possible errors in the profile??
Eirik
RE: Modbus TCP coil issue - admin - 30.08.2018
Install RC1 firmware http://forum.logicmachine.net/showthread.php?tid=1562