+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Visualization (https://forum.logicmachine.net/forumdisplay.php?fid=9)
+--- Thread: Problem with visualization and object status (/showthread.php?tid=1609)
Problem with visualization and object status - daniel.r - 23.09.2018
Good morning everyone. Thanks for the great support of LM. It's my first intervention since the search engine does not give me any results.
Equipment: LM 5 Reactor Dimmer
The problem.
Turn a lamp on and off
Group addresses
1/1/1 Light ON / OFF
1/2/1 Light status ON / OFF
Created object with main object 1/1/1 and with object status 1/2/1.
In the editing of the visualization turns the light on and off and the icon changes state. When I access the visualization outside the edit mode, it turns on the lamp, it changes the on-off icon but when I press the icon again it does not send off command and it does not change the icon.
When I look through the ETS I see that it only sends the firing order.
Thanks in advance
Daniel
RE: Problem with visualization and object status - admin - 24.09.2018
Which firmware version is your LM running?
RE: Problem with visualization and object status - daniel.r - 24.09.2018
(24.09.2018, 05:13)admin Wrote: Which firmware version is your LM running?
Thanks in advnce admin. Versión: 20170927
RE: Problem with visualization and object status - Daniel - 24.09.2018
Old bug
https://forum.logicmachine.net/showthread.php?tid=1229&pid=8440#pid8440
Or install latest RC1 FW
RE: Problem with visualization and object status - daniel.r - 24.09.2018
Sorry Daniel I don´t find this thread. Problem solved with this update.
Thanks.
Daniel