Logic Machine Forum
LM2 ethernet speed - Printable Version

+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: LM2 ethernet speed (/showthread.php?tid=1662)

LM2 ethernet speed - gtsamis - 19.10.2018

Hi,

I have a Logic Machine 2 (FW 20180828) that on most occasion locks ethernet speed at 10Mbps although my switch is 10/100Mbps.
I have changed cable, tried another port but didn't solve the problem. After some reboots it might lock at 100Mbps but usually stays at 10Mbps.

Any suggestions?

   
   

RE: LM2 ethernet speed - Daniel - 19.10.2018

What for do you need 100Mb/s? KNX is 9.6Kb/s

RE: LM2 ethernet speed - gtsamis - 19.10.2018

(19.10.2018, 08:58)Daniel. Wrote: What for do you need 100Mb/s?  KNX is 9.6Kb/s

It doesn't has to do with BUS speed, visualization and system response duration over the internet is what speed needed for.

RE: LM2 ethernet speed - Daniel - 19.10.2018

You will not see any difference. Visu is always saved in cache of browser and then it is only data exchange which are KNX objects.
If you buy new LM5 then you could see some difference as HW is much faster then the very old LM2.

RE: LM2 ethernet speed - gtsamis - 19.10.2018

(19.10.2018, 09:12)Daniel. Wrote: You will not see any difference. Visu is always saved in cache of browser and then it is only data exchange which are KNX objects.
If you buy new LM5 then you could see some difference as HW is much faster then the very old LM2.

Actually i do see a lot of difference. Even in lan when lm is locked at 100Mbps the visu page loads at no time, when locked at 10Mbps same visu page loads at about 3-5sec.

RE: LM2 ethernet speed - Daniel - 19.10.2018

(19.10.2018, 09:18)gtsamis Wrote:
(19.10.2018, 09:12)Daniel. Wrote: You will not see any difference. Visu is always saved in cache of browser and then it is only data exchange which are KNX objects.
If you buy new LM5 then you could see some difference as HW is much faster then the very old LM2.

Actually i do see a lot of difference. Even in lan when lm is locked at 100Mbps the visu page loads at no time, when locked at 10Mbps same visu page loads at about 3-5sec.

hm... in normal (modern) browser it should not matter, let Admin came back from holiday, he may say something.

RE: LM2 ethernet speed - gtsamis - 19.10.2018

Let him rest Big Grin , busy winter coming.
It's not so critical, i just have to reboot it 5-6 times and lock at 100Mbps for the moment.

RE: LM2 ethernet speed - admin - 22.10.2018

This looks like a hardware issue of some sort. Can you try another switch/router if possible?

RE: LM2 ethernet speed - gtsamis - 22.10.2018

(22.10.2018, 06:44)admin Wrote: This looks like a hardware issue of some sort. Can you try another switch/router if possible?

Will try a new router someday soon and let you know.

RE: LM2 ethernet speed - rocfusion - 25.10.2018

Just try changing your network cable to the LM.

RE: LM2 ethernet speed - gtsamis - 26.10.2018

(25.10.2018, 19:58)rocfusion Wrote: Just try changing your network cable to the LM.

Done that... didn't work. I have changed the switch and for the moment seems stable at 100Mbps...

RE: LM2 ethernet speed - gtsamis - 11.12.2018

Hi again,
Seems that changing cable and switch just solved the problem temporally.
The LM still locks at 10Mbps most of the times plus it starts logging Transmitter Error(send 0 receive 1) and KNX/TP Connected.

Is there anything else i could try ?

Thank you in advance
George

RE: LM2 ethernet speed - gtsamis - 19.12.2018

Any update?

RE: LM2 ethernet speed - admin - 19.12.2018

Since this is a hardware issue the only proper solution is to replace the device. Please contact us via e-mail.