+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2)
+--- Thread: My LM5 is not saving changes !! (/showthread.php?tid=1680)
My LM5 is not saving changes !! - HannPark - 26.10.2018
Recently, i've been working in my LM5, and everything was normal but since one hour ago it stopped to save changes,
I set some group directions on the visualization, saving changes after that... but when I reloaded the page the changes I made were missing.. i'm stuck in this
I put my backup in another LM5 and the problem persists, also put it in factory state and its all the same.
has you guys encountered with the same problem?
RE: My LM5 is not saving changes !! - Erwin van der Zwart - 26.10.2018
Hi,
Sounds like a cache result. Have you tried clearing browser history?
BR,
Erwin
RE: My LM5 is not saving changes !! - CHOUAIBOU - 26.10.2018
(26.10.2018, 16:45)HannPark Wrote: Recently, i've been working in my LM5, and everything was normal but since one hour ago it stopped to save changes,
I set some group directions on the visualization, saving changes after that... but when I reloaded the page the changes I made were missing.. i'm stuck in this
I put my backup in another LM5 and the problem persists, also put it in factory state and its all the same.
has you guys encountered with the same problem?
Hi HannPark,
I have encountered the same problem and cleaning the cache solved it. It was not with LM5 but with Schneider Electric SpaceLYnk. Erwin is right.
B.R
RE: My LM5 is not saving changes !! - HannPark - 27.10.2018
Thank you guys,
I deleted my browser caché and was all the same, but I noticed that i had an older firmware version (20180822) so I update it to the new version (20180828), and it works...
RE: My LM5 is not saving changes !! - Botsmall - 13.12.2018
Faced the same problem. Spacelynk device. Firmware 20180828 from SE is not on the official site. Is this firmware only for LM?
Warranty device. I would not like to download third-party firmware from SE.
RE: My LM5 is not saving changes !! - Daniel - 13.12.2018
(13.12.2018, 10:24)Botsmall Wrote: Faced the same problem. Spacelynk device. Firmware 20180828 from SE is not on the official site. Is this firmware only for LM?
Warranty device. I would not like to download third-party firmware from SE.
Hi
You can't install LM firmware on spaceLYnk. Device would simply not start if you do it.
BR
RE: My LM5 is not saving changes !! - Botsmall - 13.12.2018
then how do i get out of this situation? (:
RE: My LM5 is not saving changes !! - Daniel - 13.12.2018
Latest firmware for SL is on SE webpage. It should have version 2.3.0
RE: My LM5 is not saving changes !! - Botsmall - 13.12.2018
Yes. Exactly. spaceLYnk-2.3.0_hw2.xx_hw3.xx.
Just after the update, this situation takes place.
p.s. Browser history cleaned.
RE: My LM5 is not saving changes !! - Daniel - 13.12.2018
Make a test. Change some settings in general config then sync project and then reboot device. Once rebooted check if the changes made are still there.
RE: My LM5 is not saving changes !! - Botsmall - 13.12.2018
The only thing that I managed to keep was the background color and the language of the welcome window. All other settings are reset (objects, modbus devices, network settings, main anguage... etc.). I did all this in a browser window.
RE: My LM5 is not saving changes !! - Daniel - 13.12.2018
Did make a backup before the upgrade? If yes did you try to restore it?
I would make factory reset and then restore the project.
RE: My LM5 is not saving changes !! - Botsmall - 13.12.2018
Unfortunately, I did not make a copy of the project.
But on the site SE there are examples of projects that I tried to download after a complete reset of the device. The result is the same ):
RE: My LM5 is not saving changes !! - Daniel - 13.12.2018
(13.12.2018, 11:28)Botsmall Wrote: Unfortunately, I did not make a copy of the project.
But on the site SE there are examples of projects that I tried to download after a complete reset of the device. The result is the same ):
The last thing what I can suggest before replacing SD card is hardware factory reset. Press reset button for 10 sec, LED will start flash red slowly, then release and press again for 10 sec. LED will flash red faster.
RE: My LM5 is not saving changes !! - Botsmall - 14.12.2018
thanks for the help.
helped hardware factory reset by manual: "AN2_001_How_to_flash_microSD_card_spaceLYnk". (;