Logic Machine Forum
LogicMachine Cloud solution _ Support - Printable Version

+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: LogicMachine Cloud solution _ Support (/showthread.php?tid=1769)

Pages: 1 2


LogicMachine Cloud solution _ Support - Triet Phan - 04.12.2018

Hi colleagues,

I am trying to do cloud solution on my LM5RIOE, i did following instruction as below link:
http://openrb.com/logicmachine-cloud-solution/

But i am in stuck at step 9 because i don't see any "Sync Cloud" button. Not sure why.

Can you guys help me on this ?

am i missing any pre-installation or pre-doing something ?

Thank you so much for your support


RE: LogicMachine Cloud solution _ Support - Daniel - 04.12.2018

Hi
Did you register here https://cloud.logicmachine.net/user-management/auth/login and activated your account?
Once done just login in Mosaic and sync.
Make sure LM has correct dns gateway set as it need internet access.
BR


RE: LogicMachine Cloud solution _ Support - Triet Phan - 04.12.2018

(04.12.2018, 08:31)Daniel. Wrote: Hi
Did you register here https://cloud.logicmachine.net/user-management/auth/login and activated your account?
Once done just login in Mosaic and sync.
Make sure LM has correct dns gateway set as it need internet access.
BR

Hello Daniel,

I already registered and had an account.

Can u tell me which above bold Mosaic are you mentioning ? Mosaic application inside LM or somewhere ? Can u give me a picture to guide me con that ?

LM has internet access because i did download logic machine cloud configuration via internet.


RE: LogicMachine Cloud solution _ Support - Daniel - 04.12.2018

Yes Mosaic 2.0 inside LM. Do not use Mosaic 3.0 Beta as it is for testing only. The cloud app you can ignore it is not needed for anything apart of push notifications. As long you were able to connect to app store then your connection is fine.
Did you login in Mosaic? if yes what happen when you press sync?


RE: LogicMachine Cloud solution _ Support - Triet Phan - 04.12.2018

(04.12.2018, 09:20)Daniel. Wrote: Yes Mosaic 2.0 inside LM.  Do not use Mosaic 3.0 Beta as it is for testing only.  The cloud app you can ignore it is not needed for anything apart of push notifications.  As long you were able to connect to app store then your connection is fine.
Did you login in Mosaic? if yes what happen when you press sync?

Today i dont have chance to come to site and back to site on tomorrow and feedback to you.

Another thing that if i can use this cloud to show visulization and cameras ?


RE: LogicMachine Cloud solution _ Support - Daniel - 04.12.2018

The cameras are bit tricky. The cloud does nothing in term of video conversion. If you have camera stream available remotely in mjpeg format then you can use video widget which has place to local and remote url.


RE: LogicMachine Cloud solution _ Support - Triet Phan - 04.12.2018

(04.12.2018, 11:47)Daniel. Wrote: The cameras are bit tricky.  The cloud does nothing in term of video conversion. If you have camera stream available remotely in mjpeg format then you can use video widget which has place to local and remote url.

I saw there are 2 places for putting url of camreras. Local URL is for when owner inside his house and Remote URL is for when he is outside his house, is that right , Daniel ?


RE: LogicMachine Cloud solution _ Support - Daniel - 04.12.2018

(04.12.2018, 12:35)Triet Phan Wrote:
(04.12.2018, 11:47)Daniel. Wrote: The cameras are bit tricky.  The cloud does nothing in term of video conversion. If you have camera stream available remotely in mjpeg format then you can use video widget which has place to local and remote url.

I saw there are 2 places for putting url of camreras. Local URL is for when owner inside his house and Remote URL is for when he is outside his house, is that right , Daniel ?

Correct. When connected via cloud then remote url will be used to stream.


RE: LogicMachine Cloud solution _ Support - Triet Phan - 05.12.2018

(04.12.2018, 12:37)Daniel. Wrote:
(04.12.2018, 12:35)Triet Phan Wrote:
(04.12.2018, 11:47)Daniel. Wrote: The cameras are bit tricky.  The cloud does nothing in term of video conversion. If you have camera stream available remotely in mjpeg format then you can use video widget which has place to local and remote url.

I saw there are 2 places for putting url of camreras. Local URL is for when owner inside his house and Remote URL is for when he is outside his house, is that right , Daniel ?

Correct. When connected via cloud then remote url will be used to stream.

Hi Daniel,

remote URL and local URL to put on video widget are the same ?


RE: LogicMachine Cloud solution _ Support - Daniel - 05.12.2018

(05.12.2018, 10:08)Triet Phan Wrote:
(04.12.2018, 12:37)Daniel. Wrote:
(04.12.2018, 12:35)Triet Phan Wrote:
(04.12.2018, 11:47)Daniel. Wrote: The cameras are bit tricky.  The cloud does nothing in term of video conversion. If you have camera stream available remotely in mjpeg format then you can use video widget which has place to local and remote url.

I saw there are 2 places for putting url of camreras. Local URL is for when owner inside his house and Remote URL is for when he is outside his house, is that right , Daniel ?

Correct. When connected via cloud then remote url will be used to stream.

Hi Daniel,

remote URL and local URL to put on video widget are the same ?
No, local is what you use locally with a local IP and remote is something what you can access from outside. Usually with external IP and a port


RE: LogicMachine Cloud solution _ Support - Triet Phan - 05.12.2018

today i make synchronising for Mosaic and it works well. Do we have a chance to having some apps inside LM also be synchronised ?


RE: LogicMachine Cloud solution _ Support - Daniel - 05.12.2018

Alexa works over cloud so you have to sync it too. Cloud app which does the push notifications also need cloud. There are more apps/services planed in the near future.


RE: LogicMachine Cloud solution _ Support - davidsilva - 15.04.2019

Hi,
Still about the cameras on Mosaic, I'm using the Video Player Widget with dynamic dns on Remote URL of stream. It works well on Mosaic 2.0, but on Mosaic 3.0 and Mosaic Beta, the widget doesn't apear on the cloud.

Best regards,


RE: LogicMachine Cloud solution _ Support - PassivPluss - 27.06.2019

Is it possible to get visu through cloud? In that case how? Or why not?


RE: LogicMachine Cloud solution _ Support - Daniel - 27.06.2019

Only Mosaic can be used in cloud. The reason is by the way we save data. Custom visu saves all configs in SQLite where Mosaic in Redis DB in json format. We can easily send json to cloud but not really SQLite DB. This is why we are planing to extend functionality of Mosaic to the extent that you will not need custom visu anymore.


RE: LogicMachine Cloud solution _ Support - PassivPluss - 27.06.2019

Ok. For now mosaic is useless in building with automation. Like room controller with comfort/standby and frost and ventilation systems etc. Will this also be build in?
Support for visu will be there in future also?


RE: LogicMachine Cloud solution _ Support - Daniel - 27.06.2019

You need to be more precise, You can do that already.


RE: LogicMachine Cloud solution _ Support - Tokatubs - 30.06.2019

(27.06.2019, 07:50)PassivPluss Wrote: Ok. For now mosaic is useless in building with automation. Like room controller with comfort/standby and frost and ventilation systems etc. Will this also be build in?
Support for visu will be there in future also?

Take a look at the attached json. Here the Hvac is in the mosaic. This is not a problem.


RE: LogicMachine Cloud solution _ Support - AlexLV - 30.06.2019

Hi,

sorry, not used Mosaic much till now, but how to use attached example in my system? How upload it and watch? Also not seen docs for widget and mosaic, may be somebody can show me the right way to docs? Smile

Big thanks,

Alex


RE: LogicMachine Cloud solution _ Support - Tokatubs - 30.06.2019

(30.06.2019, 18:39)AlexLV Wrote: Hi,

sorry, not used Mosaic much till now, but how to use attached example in my system? How upload it and watch? Also not seen docs for widget and mosaic, may be somebody can show me the right way to docs? Smile

Big thanks,

Alex

2 or 3 you are using?

But i guess in both examples just create a room and add an new widget.
Then add the widget creator. On top you will see add from Json. Then add the example,, Save.