+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: connection problem (/showthread.php?tid=1785)
connection problem - balatis - 13.12.2018
hi
i have a problem with a spacelynk it worked but today it connecte
and disconnect
thanks in atvance
RE: connection problem - Erwin van der Zwart - 13.12.2018
Hi,
Does it realy disconnect or only in logs?
When having a real high TP load the UART can report false messages..
BR,
Erwin
RE: connection problem - balatis - 13.12.2018
hi
disconnect realy....
all device has communucation but the spacelynk no
RE: connection problem - Erwin van der Zwart - 13.12.2018
Hi,
Can you try to remove the TP bus from the controller and reconnect it?
The TPUART is powered from the bus so restarting the controller does not restart the TPUART.
Maybe this solved your issue..
BR,
Erwin
RE: connection problem - balatis - 13.12.2018
i did but nothing....
i did and reset all system knx ...
RE: connection problem - Daniel - 14.12.2018
Hi
If it used to work fine then I would try swapping KNX PSU. I assume traffic is normal.
BR