Logic Machine Forum
Remaining time or counter - Printable Version

+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Visualization (https://forum.logicmachine.net/forumdisplay.php?fid=9)
+--- Thread: Remaining time or counter (/showthread.php?tid=1789)

Pages: 1 2 3


RE: Remaining time or counter - CHOUAIBOU - 25.12.2018

(24.12.2018, 17:00)AlexLV Wrote: I think above just copy of previous post...

Guys, can you please post here final script?? I tried to make changes mentioned but not work for me..

Hi AlexLV,
Please find bellow the working script. There was an error in the time string format.
Merry Christmas

B.R,
Chouaibou.
Code:
-- ** Staircase logic with external time object and retriggering on input object Version 3.2 ** --
-- ****************************** Created by Erwin van der Zwart **************************** --
-- ************************************** SET PARAMETERS ************************************ --

-- Set output address
AddressOutput = '32/1/21'  -- 01. 1 bit (boolean)

-- Set external time address (optional)
AddressExternalTime = '32/1/22' -- 07. 2 byte unsigned integer

-- Use time left indication 
UseTimeLeft = true -- Set to false if no time left indication is used 

-- Set feedback adress of time left indication (optional)
AddressTimeLeft = '32/1/23' -- 255 byte string

-- Set time delay (Used when external time is not available)
SetDelay = 120 -- 2 minutes

-- Seconds or Minutes
SetSec = true -- Set to false for Minutes

-- Set factor delay (Multiplies Delay)
SetFac = 1

-- Logic can be turned of by value 0
Off_by_Value_Zero = false

-- ************************************** END PARAMETERS ************************************ --
-- *************************** DON'T CHANGE ANYTHING UNDER THIS LINE ************************ --
Input_Value = event.getvalue()
if Off_by_Value_Zero == false and (Input_Value == false or Input_Value == 0) then
 return
else
 tpid = storage.get('PID:' .. _SCRIPTNAME)
 if tpid == nil then
     pid = os.getpid()
     storage.set('PID:' .. _SCRIPTNAME, pid)
 else
   pid = os.getpid()  
   storage.set('PID:' .. _SCRIPTNAME, pid)
   os.kill(tpid, signal.SIGKILL)
 end
 function Calculate_Time(StairCaseTime)
   if StairCaseTime > (86400 -1) then
     StairCaseTime = (86400 -1)
   end
   local hours = math.floor(StairCaseTime / 3600 % 24)
   local minutes = math.floor(StairCaseTime / 60 % 60)
   local seconds = math.floor(StairCaseTime % 60)
   time = {
     day = 0,
     hour = hours,
     minute = minutes,
     second = seconds,
   }
   time =string.format('%02d:%02d:%02d',time.hour,time.minute,time.second)
   return time
 end
 if Input_Value == true or Input_Value == 1 then
   ValueExternalTime = grp.getvalue(AddressExternalTime) or SetDelay
   if SetSec == true then
     Multiply_Seconds = 1
   else
     Multiply_Seconds = 60
   end
   StairCaseTime = ValueExternalTime * Multiply_Seconds * SetFac
   ValueOutput = grp.getvalue(AddressOutput)
   if ValueOutput == false then
     grp.write(AddressOutput, true)
   end
   if UseTimeLeft == true then
     if StairCaseTime > 0 then
       time = Calculate_Time(StairCaseTime)
       grp.update(AddressTimeLeft, time)
       repeat
         StairCaseTime = StairCaseTime - 1
         time = Calculate_Time(StairCaseTime)
         grp.update(AddressTimeLeft, time)
         os.sleep(1)
       until StairCaseTime == 0
     end    
   else
     os.sleep(StairCaseTime)
   end
   grp.write(AddressOutput, false)
 elseif Input_Value == false or Input_Value == 0 then
   ValueOutput = grp.getvalue(AddressOutput)
   if ValueOutput == true then
     if UseTimeLeft == true then
       time = Calculate_Time(0)
       grp.update(AddressTimeLeft, time)
     end
     grp.write(AddressOutput, false)
   end
 end
 storage.delete('PID:' .. _SCRIPTNAME)
end



RE: Remaining time or counter - AlexLV - 26.12.2018

Chouaibou, BIG THANKS Smile

Now it finally working!!! You just forgot insert input address, so below all should work fineSmile

I wish to all Happy New Year Smile

Alex

Code:
-- ** Staircase logic with external time object and retriggering on input object Version 3.2 ** --
-- ****************************** Created by Erwin van der Zwart **************************** --
-- ************************************** SET PARAMETERS ************************************ --

-- Set input address
AddressInput = '32/1/20 ' -- 01. 1 bit (boolean)
-- Set output address
AddressOutput = '32/1/21'  -- 01. 1 bit (boolean)

-- Set external time address (optional)
AddressExternalTime = '32/1/22' -- 07. 2 byte unsigned integer

-- Use time left indication
UseTimeLeft = true -- Set to false if no time left indication is used

-- Set feedback adress of time left indication (optional)
AddressTimeLeft = '32/1/23' -- 255 byte string

-- Set time delay (Used when external time is not available)
SetDelay = 120 -- 2 minutes

-- Seconds or Minutes
SetSec = true -- Set to false for Minutes

-- Set factor delay (Multiplies Delay)
SetFac = 1

-- Logic can be turned of by value 0
Off_by_Value_Zero = false

-- ************************************** END PARAMETERS ************************************ --
-- *************************** DON'T CHANGE ANYTHING UNDER THIS LINE ************************ --
Input_Value = event.getvalue()
if Off_by_Value_Zero == false and (Input_Value == false or Input_Value == 0) then
return
else
tpid = storage.get('PID:' .. _SCRIPTNAME)
if tpid == nil then
    pid = os.getpid()
    storage.set('PID:' .. _SCRIPTNAME, pid)
else
  pid = os.getpid()  
  storage.set('PID:' .. _SCRIPTNAME, pid)
  os.kill(tpid, signal.SIGKILL)
end
function Calculate_Time(StairCaseTime)
  if StairCaseTime > (86400 -1) then
    StairCaseTime = (86400 -1)
  end
  local hours = math.floor(StairCaseTime / 3600 % 24)
  local minutes = math.floor(StairCaseTime / 60 % 60)
  local seconds = math.floor(StairCaseTime % 60)
  time = {
    day = 0,
    hour = hours,
    minute = minutes,
    second = seconds,
  }
  time =string.format('%02d:%02d:%02d',time.hour,time.minute,time.second)
  return time
end
if Input_Value == true or Input_Value == 1 then
  ValueExternalTime = grp.getvalue(AddressExternalTime) or SetDelay
  if SetSec == true then
    Multiply_Seconds = 1
  else
    Multiply_Seconds = 60
  end
  StairCaseTime = ValueExternalTime * Multiply_Seconds * SetFac
  ValueOutput = grp.getvalue(AddressOutput)
  if ValueOutput == false then
    grp.write(AddressOutput, true)
  end
  if UseTimeLeft == true then
    if StairCaseTime > 0 then
      time = Calculate_Time(StairCaseTime)
      grp.update(AddressTimeLeft, time)
      repeat
        StairCaseTime = StairCaseTime - 1
        time = Calculate_Time(StairCaseTime)
        grp.update(AddressTimeLeft, time)
        os.sleep(1)
      until StairCaseTime == 0
    end    
  else
    os.sleep(StairCaseTime)
  end
  grp.write(AddressOutput, false)
elseif Input_Value == false or Input_Value == 0 then
  ValueOutput = grp.getvalue(AddressOutput)
  if ValueOutput == true then
    if UseTimeLeft == true then
      time = Calculate_Time(0)
      grp.update(AddressTimeLeft, time)
    end
    grp.write(AddressOutput, false)
  end
end
storage.delete('PID:' .. _SCRIPTNAME)
end



RE: Remaining time or counter - AlexLV - 06.01.2019

Hi. 
How correctly reset this timer in taster key is pressed before timer finished?? If use this from script:

-- Logic can be turned of by value 0
Off_by_Value_Zero = true

timer just stopped not resetted. If I press input key again timer just starting again. How change script? 
Thank you for help.
Alex


RE: Remaining time or counter - davidchispas - 29.01.2020

Code:
blocking = grp.read('0/0/1')
Out01 = '0/0/2'

if AddressOutput == true and (blocking == true or blocking == 1) then grp.write (out01, true)
  else
  if AddressOutput == false and (blocking == true or blocking == 1) then grp.write (out01, false)
  end
end

Hello, if possible I would like to include in this script one more function, it would be a block. But I can't make it work.


RE: Remaining time or counter - admin - 29.01.2020

This script is incorrect. grp.read sends read request but does not return current value. You need to use grp.getvalue instead.

It can also be simplified like this:
Code:
value = event.getvalue()
blocking = grp.getvalue('0/0/1')

if blocking then
  grp.write('0/0/2', value)
end

In FBeditor there's Select switch > Lock out block that can be used.


RE: Remaining time or counter - davidchispas - 29.01.2020

Code:
-- ** Staircase logic with external time object and retriggering on input object Version 3.2 ** --
-- ****************************** Created by Erwin van der Zwart **************************** --
-- ************************************** SET PARAMETERS ************************************ --

-- Set input address
AddressInput = '32/1/20 ' -- 01. 1 bit (boolean)
-- Set output address
AddressOutput = '32/1/21'  -- 01. 1 bit (boolean)

-- Set external time address (optional)
AddressExternalTime = '32/1/22' -- 07. 2 byte unsigned integer

-- Use time left indication
UseTimeLeft = true -- Set to false if no time left indication is used

-- Set feedback adress of time left indication (optional)
AddressTimeLeft = '32/1/23' -- 255 byte string

-- Set time delay (Used when external time is not available)
SetDelay = 120 -- 2 minutes

-- Seconds or Minutes
SetSec = true -- Set to false for Minutes

-- Set factor delay (Multiplies Delay)
SetFac = 1

-- Logic can be turned of by value 0
Off_by_Value_Zero = false

-- ************************************** END PARAMETERS ************************************ --
-- *************************** DON'T CHANGE ANYTHING UNDER THIS LINE ************************ --
Input_Value = event.getvalue()
if Off_by_Value_Zero == false and (Input_Value == false or Input_Value == 0) then
return
else
tpid = storage.get('PID:' .. _SCRIPTNAME)
if tpid == nil then
    pid = os.getpid()
    storage.set('PID:' .. _SCRIPTNAME, pid)
else
  pid = os.getpid()  
  storage.set('PID:' .. _SCRIPTNAME, pid)
  os.kill(tpid, signal.SIGKILL)
end
function Calculate_Time(StairCaseTime)
  if StairCaseTime > (86400 -1) then
    StairCaseTime = (86400 -1)
  end
  local hours = math.floor(StairCaseTime / 3600 % 24)
  local minutes = math.floor(StairCaseTime / 60 % 60)
  local seconds = math.floor(StairCaseTime % 60)
  time = {
    day = 0,
    hour = hours,
    minute = minutes,
    second = seconds,
  }
  time =string.format('%02d:%02d:%02d',time.hour,time.minute,time.second)
  return time
end
if Input_Value == true or Input_Value == 1 then
  ValueExternalTime = grp.getvalue(AddressExternalTime) or SetDelay
  if SetSec == true then
    Multiply_Seconds = 1
  else
    Multiply_Seconds = 60
  end
  StairCaseTime = ValueExternalTime * Multiply_Seconds * SetFac
  ValueOutput = grp.getvalue(AddressOutput)
  if ValueOutput == false then
    grp.write(AddressOutput, true)
  end
  if UseTimeLeft == true then
    if StairCaseTime > 0 then
      time = Calculate_Time(StairCaseTime)
      grp.update(AddressTimeLeft, time)
      repeat
        StairCaseTime = StairCaseTime - 1
        time = Calculate_Time(StairCaseTime)
        grp.update(AddressTimeLeft, time)
        os.sleep(1)
      until StairCaseTime == 0
    end    
  else
    os.sleep(StairCaseTime)
  end
  grp.write(AddressOutput, false)
elseif Input_Value == false or Input_Value == 0 then
  ValueOutput = grp.getvalue(AddressOutput)
  if ValueOutput == true then
    if UseTimeLeft == true then
      time = Calculate_Time(0)
      grp.update(AddressTimeLeft, time)
    end
    grp.write(AddressOutput, false)
  end
end
storage.delete('PID:' .. _SCRIPTNAME)
end

Hi admin, thanks for your response, I need to include it in the script itself. I have tried your script and it only activates the output if the block is true, but I need if the block is true that it activates and deactivates me at the end of the time.


RE: Remaining time or counter - admin - 29.01.2020

If you don't want to run script if blocking is set to true then simply add this to the start of your script:
Code:
blocking = grp.getvalue('0/0/1')

if not blocking then
  return
end



RE: Remaining time or counter - davidchispas - 29.01.2020

(29.01.2020, 13:34)admin Wrote: If you don't want to run script if blocking is set to true then simply add this to the start of your script:
Code:
blocking = grp.getvalue('0/0/1')

if not blocking then
  return
end
Thanks Admin, it works perfectly! Smile

Code:
-- ** Staircase logic with external time object and retriggering on input object Version 3.2 ** --
-- ****************************** Created by Erwin van der Zwart **************************** --
-- ************************************** SET PARAMETERS ************************************ --

-- Set input address
AddressInput = '21/1/40' -- 01. 1 bit (boolean)
-- Set output address
AddressOutput = '1/1/40' -- 01. 1 bit (boolean)

-- Set external time address (optional)
AddressExternalTime = '55/1/4' -- 07. 2 byte unsigned integer

-- Use time left indication
UseTimeLeft = true -- Set to false if no time left indication is used

-- Set feedback adress of time left indication (optional)
AddressTimeLeft = '55/1/5' -- 255 byte string

-- Set time delay (Used when external time is not available)
SetDelay = 120 -- 2 minutes

-- Seconds or Minutes
SetSec = true -- Set to false for Minutes

-- Set factor delay (Multiplies Delay)
SetFac = 1

-- Logic can be turned of by value 0
Off_by_Value_Zero = false

-- ************************************** END PARAMETERS ************************************ --
-- *************************** DON'T CHANGE ANYTHING UNDER THIS LINE ************************ --







blocking = grp.getvalue('40/1/40')
if not blocking then
  return
end


Input_Value = event.getvalue()
if Off_by_Value_Zero == false and (Input_Value == false or Input_Value == 0) then
return
else
tpid = storage.get('PID:' .. _SCRIPTNAME)
if tpid == nil then
     pid = os.getpid()
     storage.set('PID:' .. _SCRIPTNAME, pid)
else
   pid = os.getpid()   
   storage.set('PID:' .. _SCRIPTNAME, pid)
   os.kill(tpid, signal.SIGKILL)
end
function Calculate_Time(StairCaseTime)
   if StairCaseTime > (86400 -1) then
     StairCaseTime = (86400 -1)
   end
   local hours = math.floor(StairCaseTime / 3600 % 24)
   local minutes = math.floor(StairCaseTime / 60 % 60)
   local seconds = math.floor(StairCaseTime % 60)
   time = {
     day = 0,
     hour = hours,
     minute = minutes,
     second = seconds,
   }
   time =string.format('%02d:%02d:%02d',time.hour,time.minute,time.second)
   return time
end
if Input_Value == true or Input_Value == 1 then
   ValueExternalTime = grp.getvalue(AddressExternalTime) or SetDelay
   if SetSec == true then
     Multiply_Seconds = 1
   else
     Multiply_Seconds = 60
   end
   StairCaseTime = ValueExternalTime * Multiply_Seconds * SetFac
   ValueOutput = grp.getvalue(AddressOutput)
   if ValueOutput == false then
     grp.write(AddressOutput, true)
   end
   if UseTimeLeft == true then
     if StairCaseTime > 0 then
       time = Calculate_Time(StairCaseTime)
       grp.update(AddressTimeLeft, time)
       repeat
         StairCaseTime = StairCaseTime - 1
         time = Calculate_Time(StairCaseTime)
         grp.update(AddressTimeLeft, time)
         os.sleep(1)
       until StairCaseTime == 0
     end   
   else
     os.sleep(StairCaseTime)
   end
   grp.write(AddressOutput, false)
elseif Input_Value == false or Input_Value == 0 then
   ValueOutput = grp.getvalue(AddressOutput)
   if ValueOutput == true then
     if UseTimeLeft == true then
       time = Calculate_Time(0)
       grp.update(AddressTimeLeft, time)
     end
     grp.write(AddressOutput, false)
   end
end
storage.delete('PID:' .. _SCRIPTNAME)
end

I have a small error activating the lock. If the timing is already started before blocking ... at the end of that time, send false. Is it possible to correct not send it?


RE: Remaining time or counter - Erwin van der Zwart - 29.01.2020

Hi,

You need to add the blocking after the kill part to make sure the previous script is killed when the new one started.
Code:
-- ** Staircase logic with external time object and retriggering on input object Version 3.2 ** --
-- ****************************** Created by Erwin van der Zwart **************************** --
-- ************************************** SET PARAMETERS ************************************ --

-- Set input address
AddressInput = '21/1/40' -- 01. 1 bit (boolean)
-- Set output address
AddressOutput = '1/1/40' -- 01. 1 bit (boolean)

-- Set external time address (optional)
AddressExternalTime = '55/1/4' -- 07. 2 byte unsigned integer

-- Use time left indication
UseTimeLeft = true -- Set to false if no time left indication is used

-- Set feedback adress of time left indication (optional)
AddressTimeLeft = '55/1/5' -- 255 byte string

-- Set blocking address
AddressBlocking = '40/1/40'

-- Set time delay (Used when external time is not available)
SetDelay = 120 -- 2 minutes

-- Seconds or Minutes
SetSec = true -- Set to false for Minutes

-- Set factor delay (Multiplies Delay)
SetFac = 1

-- Logic can be turned of by value 0
Off_by_Value_Zero = false

-- ************************************** END PARAMETERS ************************************ --
-- *************************** DON'T CHANGE ANYTHING UNDER THIS LINE ************************ --

Input_Value = event.getvalue()
if Off_by_Value_Zero == false and (Input_Value == false or Input_Value == 0) then
return
else
tpid = storage.get('PID:' .. _SCRIPTNAME)
if tpid == nil then
     pid = os.getpid()
     storage.set('PID:' .. _SCRIPTNAME, pid)
else
   pid = os.getpid()  
   storage.set('PID:' .. _SCRIPTNAME, pid)
   os.kill(tpid, signal.SIGKILL)
end

blocking = grp.getvalue(AddressBlocking)
if not blocking then
   return
end

function Calculate_Time(StairCaseTime)
   if StairCaseTime > (86400 -1) then
     StairCaseTime = (86400 -1)
   end
   local hours = math.floor(StairCaseTime / 3600 % 24)
   local minutes = math.floor(StairCaseTime / 60 % 60)
   local seconds = math.floor(StairCaseTime % 60)
   time = {
     day = 0,
     hour = hours,
     minute = minutes,
     second = seconds,
   }
   time =string.format('%02d:%02d:%02d',time.hour,time.minute,time.second)
   return time
end
if Input_Value == true or Input_Value == 1 then
   ValueExternalTime = grp.getvalue(AddressExternalTime) or SetDelay
   if SetSec == true then
     Multiply_Seconds = 1
   else
     Multiply_Seconds = 60
   end
   StairCaseTime = ValueExternalTime * Multiply_Seconds * SetFac
   ValueOutput = grp.getvalue(AddressOutput)
   if ValueOutput == false then
     grp.write(AddressOutput, true)
   end
   if UseTimeLeft == true then
     if StairCaseTime > 0 then
       time = Calculate_Time(StairCaseTime)
       grp.update(AddressTimeLeft, time)
       repeat
         StairCaseTime = StairCaseTime - 1
         time = Calculate_Time(StairCaseTime)
         grp.update(AddressTimeLeft, time)
         os.sleep(1)
       until StairCaseTime == 0
     end   
   else
     os.sleep(StairCaseTime)
   end
   grp.write(AddressOutput, false)
elseif Input_Value == false or Input_Value == 0 then
   ValueOutput = grp.getvalue(AddressOutput)
   if ValueOutput == true then
     if UseTimeLeft == true then
       time = Calculate_Time(0)
       grp.update(AddressTimeLeft, time)
     end
     grp.write(AddressOutput, false)
   end
end
storage.delete('PID:' .. _SCRIPTNAME)
end
BR,

Erwin


RE: Remaining time or counter - AlexLV - 30.01.2020

Hi Erwin,

this is super script Smile As I sent some times ago private mail to you and you recommend to me use it - I used this script, all is working wonderful Smile Big thanks!!! One thing is absent in your script. We can just stop it if Logic turn off = 1, but can we somehow reset time before it will end by timer? In that case we will have super timer with start/stop/blocking/reset possibilities..

BR,

Alex


RE: Remaining time or counter - Erwin van der Zwart - 30.01.2020

Hi,

If you send a 1 again on the trigger object it should reset the time and start counting from start.

BR,

Erwin


RE: Remaining time or counter - AlexLV - 30.01.2020

Erwin,

Yes, I thought about such option, but I am using this at visu:

-- Use time left indication
UseTimeLeft = true -- Set to false if no time left indication is used

So when I stop I see remained time, if I restart it - time starts from the beginning. But I need if I reset timer - timer ends and remain time = zeros and output deactivated, before countdown finished by themselves.. Tried different ways, but not successfully to solve this idea with your script..


RE: Remaining time or counter - davidchispas - 30.01.2020

(29.01.2020, 22:05)Erwin van der Zwart Wrote: Hi,

You need to add the blocking after the kill part to make sure the previous script is killed when the new one started.
Code:
-- ** Staircase logic with external time object and retriggering on input object Version 3.2 ** --
-- ****************************** Created by Erwin van der Zwart **************************** --
-- ************************************** SET PARAMETERS ************************************ --

-- Set input address
AddressInput = '21/1/40' -- 01. 1 bit (boolean)
-- Set output address
AddressOutput = '1/1/40' -- 01. 1 bit (boolean)

-- Set external time address (optional)
AddressExternalTime = '55/1/4' -- 07. 2 byte unsigned integer

-- Use time left indication
UseTimeLeft = true -- Set to false if no time left indication is used

-- Set feedback adress of time left indication (optional)
AddressTimeLeft = '55/1/5' -- 255 byte string

-- Set blocking address
AddressBlocking = '40/1/40'

-- Set time delay (Used when external time is not available)
SetDelay = 120 -- 2 minutes

-- Seconds or Minutes
SetSec = true -- Set to false for Minutes

-- Set factor delay (Multiplies Delay)
SetFac = 1

-- Logic can be turned of by value 0
Off_by_Value_Zero = false

-- ************************************** END PARAMETERS ************************************ --
-- *************************** DON'T CHANGE ANYTHING UNDER THIS LINE ************************ --

Input_Value = event.getvalue()
if Off_by_Value_Zero == false and (Input_Value == false or Input_Value == 0) then
return
else
tpid = storage.get('PID:' .. _SCRIPTNAME)
if tpid == nil then
     pid = os.getpid()
     storage.set('PID:' .. _SCRIPTNAME, pid)
else
   pid = os.getpid()  
   storage.set('PID:' .. _SCRIPTNAME, pid)
   os.kill(tpid, signal.SIGKILL)
end

blocking = grp.getvalue(AddressBlocking)
if not blocking then
   return
end

function Calculate_Time(StairCaseTime)
   if StairCaseTime > (86400 -1) then
     StairCaseTime = (86400 -1)
   end
   local hours = math.floor(StairCaseTime / 3600 % 24)
   local minutes = math.floor(StairCaseTime / 60 % 60)
   local seconds = math.floor(StairCaseTime % 60)
   time = {
     day = 0,
     hour = hours,
     minute = minutes,
     second = seconds,
   }
   time =string.format('%02d:%02d:%02d',time.hour,time.minute,time.second)
   return time
end
if Input_Value == true or Input_Value == 1 then
   ValueExternalTime = grp.getvalue(AddressExternalTime) or SetDelay
   if SetSec == true then
     Multiply_Seconds = 1
   else
     Multiply_Seconds = 60
   end
   StairCaseTime = ValueExternalTime * Multiply_Seconds * SetFac
   ValueOutput = grp.getvalue(AddressOutput)
   if ValueOutput == false then
     grp.write(AddressOutput, true)
   end
   if UseTimeLeft == true then
     if StairCaseTime > 0 then
       time = Calculate_Time(StairCaseTime)
       grp.update(AddressTimeLeft, time)
       repeat
         StairCaseTime = StairCaseTime - 1
         time = Calculate_Time(StairCaseTime)
         grp.update(AddressTimeLeft, time)
         os.sleep(1)
       until StairCaseTime == 0
     end   
   else
     os.sleep(StairCaseTime)
   end
   grp.write(AddressOutput, false)
elseif Input_Value == false or Input_Value == 0 then
   ValueOutput = grp.getvalue(AddressOutput)
   if ValueOutput == true then
     if UseTimeLeft == true then
       time = Calculate_Time(0)
       grp.update(AddressTimeLeft, time)
     end
     grp.write(AddressOutput, false)
   end
end
storage.delete('PID:' .. _SCRIPTNAME)
end
BR,

Erwin
Thank you so much for the correction! Now it works perfectly! It is a great script!


RE: Remaining time or counter - victor.back - 02.05.2020

(30.01.2020, 09:29)Erwin van der Zwart Wrote: Hi,

If you send a 1 again on the trigger object it should reset the time and start counting from start.

BR,

Erwin

The count starts from begging but the output is not resends 1.
Is there something more that needs to be done for this?


RE: Remaining time or counter - Erwin van der Zwart - 02.05.2020

Hi,

Change line 80-83:
Code:
ValueOutput = grp.getvalue(AddressOutput)
if ValueOutput == false then
  grp.write(AddressOutput, true)
end
Into:
Code:
grp.write(AddressOutput, true)
This way the output is not checked on state

BR,

Erwin


RE: Remaining time or counter - victor.back - 07.05.2020

(02.05.2020, 22:05)Erwin van der Zwart Wrote: Hi,

Change line 80-83:
Code:
ValueOutput = grp.getvalue(AddressOutput)
if ValueOutput == false then
  grp.write(AddressOutput, true)
end
Into:
Code:
grp.write(AddressOutput, true)
This way the output is not checked on state

BR,

Erwin
Yeah thanks! 
Now I want to implement a Nightmode that changes the output after nightshift. 
I change the outeput address to "AddressOutputDay" and added these new ones "AddressOutputNight",  "NighMode" and "AddressOutputStatus".
Then changed the script like this

Code:
   StairCaseTime = ValueExternalTime * Multiply_Seconds * SetFac
    ValueOutput = grp.getvalue(AddressOutputStatus)
    if ValueOutput == false and NightMode == false then
     grp.write(AddressOutputDay, true)
    else
      grp.write(AddressOutputNight, true)
   end
But it just uses "AddressOutputNight" even if NightMode is false or true. 
What is the right way of doing this?


RE: Remaining time or counter - Erwin van der Zwart - 07.05.2020

Hi,

I need to see the complete script as now there is no way of telling what you do wrong, i can’t see what you have declared for the night mode vars etcetera...

BR,

Erwin


RE: Remaining time or counter - victor.back - 09.05.2020

(07.05.2020, 20:33)Erwin van der Zwart Wrote: Hi,

I need to see the complete script as now there is no way of telling what you do wrong, i can’t see what you have declared for the night mode vars etcetera...

BR,

Erwin
Here it is. 

Code:
-- ** Staircase logic with external time object and retriggering on input object Version 3.2 ** --
-- ****************************** Created by Erwin van der Zwart **************************** --
-- ************************************** SET PARAMETERS ************************************ --

-- Set input address
AddressInput = '5/4/1' -- 01. 1 bit (boolean)
-- Set output address
AddressOutputDay = '32/1/38' -- 01. 1 bit (boolean)
AddressOutputNight = '32/1/41'

-- Set Status feedback of room controoled lights
AddressOutputStatus = '5/0/26'

-- Set external time address (optional)
AddressExternalTime = '5/4/2' -- 07. 2 byte unsigned integer

-- Use time left indication
UseTimeLeft = true -- Set to false if no time left indication is used

-- Set feedback adress of time left indication (optional)
AddressTimeLeft = '32/1/39' -- 255 byte string

-- Set Auto address
AddressAuto = '32/1/40'

-- Set time delay (Used when external time is not available)
SetDelay = 120 -- 2 minutes

-- Seconds or Minutes
SetSec = true -- Set to false for Minutes

-- Set factor delay (Multiplies Delay)
SetFac = 1

-- Logic can be turned of by value 0
Off_by_Value_Zero = false

--Manuell off when sends a "0" Resets Staircase logic manually
AddressManOff = '5/0/0'

--Day/Night switchover, Night if value "1"
NightMode = '0/7/3' --01. 1 bit (boolean)

-- ************************************** END PARAMETERS ************************************ --
-- *************************** DON'T CHANGE ANYTHING UNDER THIS LINE ************************ --

Input_Value = event.getvalue()
if Off_by_Value_Zero == false and (Input_Value == false or Input_Value == 0) then
return
else
tpid = storage.get('PID:' .. _SCRIPTNAME)
if tpid == nil then
     pid = os.getpid()
     storage.set('PID:' .. _SCRIPTNAME, pid)
else
   pid = os.getpid()   
   storage.set('PID:' .. _SCRIPTNAME, pid)
   os.kill(tpid, signal.SIGKILL)
end

auto = grp.getvalue(AddressAuto)
  if not auto then
   return
end

function Calculate_Time(StairCaseTime)
   if StairCaseTime > (86400 -1) then
     StairCaseTime = (86400 -1)
   end
   local hours = math.floor(StairCaseTime / 3600 % 24)
   local minutes = math.floor(StairCaseTime / 60 % 60)
   local seconds = math.floor(StairCaseTime % 60)
   time = {
     day = 0,
     hour = hours,
     minute = minutes,
     second = seconds,
   }
   time =string.format('%02d:%02d:%02d',time.hour,time.minute,time.second)
   return time
end
if Input_Value == true or Input_Value == 1 then
   ValueExternalTime = grp.getvalue(AddressExternalTime) or SetDelay
   if SetSec == true then
     Multiply_Seconds = 1
   else
     Multiply_Seconds = 60
   end
   StairCaseTime = ValueExternalTime * Multiply_Seconds * SetFac
    ValueOutput = grp.getvalue(AddressOutputStatus)
    if ValueOutput == false and NightMode == false then
     grp.write(AddressOutputDay, true)
    else
      grp.write(AddressOutputNight, true)
   end
   if UseTimeLeft == true then
     if StairCaseTime > 0 then
       time = Calculate_Time(StairCaseTime)
       grp.update(AddressTimeLeft, time)
       repeat
         StairCaseTime = StairCaseTime - 1
         time = Calculate_Time(StairCaseTime)
         grp.update(AddressTimeLeft, time)
         os.sleep(1)
        until StairCaseTime == 0
     end   
   else
     os.sleep(StairCaseTime)
   end
    grp.write(AddressOutputDay, false)
elseif Input_Value == false or Input_Value == 0 then
   ValueOutput = grp.getvalue(AddressOutputStatus)
   if ValueOutput == true then
     if UseTimeLeft == true then
       time = Calculate_Time(0)
       grp.update(AddressTimeLeft, time)
     end
     grp.write(AddressOutputDay, false)
   end
    if AddressManOff == false then
      grp.write(StairCaseTime, 0)
      grp.write(AddressInput, 0)
      AddressTimeLeft:write(0,0,0)
        end
end
storage.delete('PID:' .. _SCRIPTNAME)
end



RE: Remaining time or counter - Erwin van der Zwart - 09.05.2020

Hi,

You declare NightMode = 'x/x/x' and later you compare NightMode == false, this will not work..

Use: NightMode = grp.getvalue('x/x/x')

BR,

Erwin


RE: Remaining time or counter - victor.back - 10.05.2020

(09.05.2020, 11:44)Erwin van der Zwart Wrote: Hi,

You declare NightMode = 'x/x/x' and later you compare NightMode == false, this will not work..

Use: NightMode = grp.getvalue('x/x/x')

BR,

Erwin
Perfect, it did the trick! Thanks. 

Is it possible to implement a script that, after staircase time the light level dims smoothly down instead of switch to 0, without changing the dim parameters in the KNX dimmer?