+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Scripting (https://forum.logicmachine.net/forumdisplay.php?fid=8)
+--- Thread: URL command to control KNX (/showthread.php?tid=1837)
URL command to control KNX - Nick Redant - 16.01.2019
Hello,
I would like to know if by an URL to a LM it is possible to change Values on the KNX bus
A third party (AMX server) will sent an IP Command as an URL I would like to integrate the KNX group adres and value to these URL'S,
does there exist a script to do this? or does anyone has experience ?
THX Nick
RE: URL command to control KNX - Daniel - 16.01.2019
Hi
Is this what you are looking for ?
https://forum.logicmachine.net/showthread.php?tid=550&pid=3007#pid3007
BR
RE: URL command to control KNX - Nick Redant - 16.01.2019
(16.01.2019, 12:38)Daniel. Wrote: Hi
Is this what you are looking for ?
https://forum.logicmachine.net/showthread.php?tid=550&pid=3007#pid3007
BR
It is working Fine THX
http://remote:remote@192.168.0.10/scada-remote?m=json&r=grp&fn=write&alias=1/1/1&value=1
until I used a PC who don't had acces as an Admin on the LM
the PC asked me for use and Pass
probably I have to incorporate user and pass as well any idea
THX Nick
RE: URL command to control KNX - Daniel - 16.01.2019
You always need to put user and password to access LM.
In this URL there is user and password. Default user is remote and password you can change. HTTP://user:password@...
In this example password is remote too.
RE: URL command to control KNX - Nick Redant - 16.01.2019
(16.01.2019, 15:33)Daniel. Wrote: You always need to put user and password to access LM.
In this URL there is user and password. Default user is remote and password you can change. HTTP://user:password@...
In this example password is remote too.
Hi Daniel
Thanks already for your support but it is not working out
1. I use this URL in chrome:
http://remote:remote123@192.168.0.10/scada-remote?m=json&r=grp&fn=write&alias=1/1/1&value=0
and I get this pop up to login on
I enter remote
And remote123
And it works
I retry without closing Chrome and it keeps working
I close Chrome and it starts allover
2. I use this URL in Mozilla:
http://remote:remote123@192.168.0.10/scada-remote?m=json&r=grp&fn=write&alias=1/1/1&value=0
and I get this pop up that I am about to login on 192.168.0.10 wit username remote
I “OK” and it works I retry without closing Mozilla and it keeps working
I close Mozilla and it starts allover
3. I Use this URL in Explorer
And I get a pop up : Unable te find ...
please check spelling
I have no clou what can be wrong
THX NIck
RE: URL command to control KNX - Daniel - 16.01.2019
Hi
1. Do not use explorer.
2. Close all browsers/tabs
3. Make sure you exported the object you want to control
4. Use Firefox/Chrome in private mode. Best to test is to open LM in one browser and send your URL in second browser.
When you have open another tab in LM browser thinks you are logging with another user and asking to retype user and password. This is meant to be used by another client not the browser which you are using to connect to LM.
BR