Logic Machine Forum
Tolerances and voltage entry range LM Lite power - Printable Version

+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: Tolerances and voltage entry range LM Lite power (/showthread.php?tid=1932)



Tolerances and voltage entry range LM Lite power - alcalini - 25.02.2019

Good Morning.

I have an LM Lite power. 


Anyone knows the range of voltage supported by the Lite Power. You have to feed it at 24Vdc, do you know if the input dc-dc converter can accept 29V without damaging it?

Thank you very much to all.


RE: Tolerances and voltage entry range LM Lite power - edgars - 25.02.2019

it works normally 12 VDC - 30 VDC


RE: Tolerances and voltage entry range LM Lite power - alcalini - 25.02.2019

(25.02.2019, 09:50)edgars Wrote: it works normally 12 VDC - 30 VDC

Perfect. 

I just tested it with the auxiliary output of the KNX power supply at 29VDC and it works correctly.

 With this I can eliminate a transformer in the electrical cabinet and protect the LM from the KNX system that is connected to a UPS.

Thank you.