+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: How to switch on after shutdown? (/showthread.php?tid=210)
How to switch on after shutdown? - buuuudzik - 05.02.2016
How can I switch on the LM after shutdown?
RE: How to switch on after shutdown? - admin - 05.02.2016
Only by a full power cycle. Power off is meant to sync all data to disk before unplugging the device from the power supply.
RE: How to switch on after shutdown? - buuuudzik - 05.02.2016
(05.02.2016, 17:57)admin Wrote: Only by a full power cycle. Power off is meant to sync all data to disk before unplugging the device from the power supply.
Can you add in further FW some question after clicking "Shutdown" to make sure that user wants shutdown the LM? It will be very helpful because Shutdown and Reboot are very near and it is possible to do Shutdown instead Reboot
