+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: SpaceLynk and Wiser For Knx BACnet release (/showthread.php?tid=2263)
SpaceLynk and Wiser For Knx BACnet release - SigmaTec - 03.10.2019
Hi all,
can you tell me which current firmware includes BACnet for SpacelYnk and Wiser For Knx?
Where can I download an official version ?
Thank's in advance for your answer.
All the best from France.
RE: SpaceLynk and Wiser For Knx BACnet release - Daniel - 03.10.2019
All of them had it. Download it from se.com
RE: SpaceLynk and Wiser For Knx BACnet release - SigmaTec - 03.10.2019
Ok ... BACnet server is native in SpaceLynk!
Thank you Daniel
RE: SpaceLynk and Wiser For Knx BACnet release - Erwin van der Zwart - 03.10.2019
Hi,
Here you can find the latest FW for spaceLYnk:
HW1 (reset button on the back)
https://download.schneider-electric.com/files?p_enDocType=Firmware+-+Released&p_File_Name=spaceLYnk-2.4.0_hw1.xx.zip&p_Doc_Ref=FW2_4_0-HW_1_X_X-sL
HW2/3 (reset button on the front)
https://download.schneider-electric.com/files?p_enDocType=Firmware+-+Released&p_File_Name=spaceLYnk-2.4.0_hw2.xx_hw3.xx.zip&p_Doc_Ref=FW2_4_0-HW_2_X_X_HW_3_X_X-sL
BR,
Erwin
RE: SpaceLynk and Wiser For Knx BACnet release - SigmaTec - 09.10.2019
Dear Erwin,
I installed the package "Wiser_for_KNX-2.4.0_hw1.xx.img" on my Wiser For Knx "2.3.0", and then, after a reeboot, it's always the same "2.3.0" release number writed à the botton left of the creen !
PS: after new firmware upload : 2.3.0 / Flashsys v2 / ©2008-2018
Any reasons ?
Thank's in advance...
RE: SpaceLynk and Wiser For Knx BACnet release - Daniel - 09.10.2019
clear browser cache
RE: SpaceLynk and Wiser For Knx BACnet release - SigmaTec - 09.10.2019
same thing...
The "system > Firmware Upgrade" indicate "SW 2.3.0" !
RE: SpaceLynk and Wiser For Knx BACnet release - Daniel - 09.10.2019
card in read only mode?
RE: SpaceLynk and Wiser For Knx BACnet release - SigmaTec - 09.10.2019
Which card ? I have already made several firmware updates without any problem...
RE: SpaceLynk and Wiser For Knx BACnet release - Daniel - 09.10.2019
Change any system settings, press sync and then reboot. Check if this what was changed is still there.
RE: SpaceLynk and Wiser For Knx BACnet release - domotiqa - 20.02.2020
(09.10.2019, 13:23)Daniel. Wrote: Change any system settings, press sync and then reboot. Check if this what was changed is still there.
I have the same problem with spacelynk imx28 of a customer version 2.1.1 that could not upgrade to 2.4 hw1.
The upgrade process running well.
But after still in 2.1.1.
I would try to 2.3 but can't find in hw1. Only broken link:
https://www.se.com/es/es/faqs/FA322491/
I already try the cache, change settings, sync...
any idea ?
RE: SpaceLynk and Wiser For Knx BACnet release - Daniel - 20.02.2020
The SD card is most likely in read only mode and has to be replaced.
RE: SpaceLynk and Wiser For Knx BACnet release - domotiqa - 20.02.2020
(20.02.2020, 20:20)Daniel. Wrote: The SD card is most likely in read only mode and has to be replaced.
ok thank you, I will check the tutorial.
But just a question:
- I can modify the program... (stored in flash ??)
- I didn't have a message in log
EDIT:
I found in system log:
Code:
Feb 20 19:44:47 fca-knx kern.info kernel: [ 1.295589] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
Feb 20 19:44:47 fca-knx kern.info kernel: [ 1.295415] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Feb 20 19:44:47 fca-knx kern.info kernel: [ 1.293130] EXT4-fs (mmcblk0p2): recovery complete
Feb 20 19:44:47 fca-knx kern.info kernel: [ 0.854610] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Feb 20 19:44:47 fca-knx kern.info kernel: [ 0.854553] EXT4-fs (mmcblk0p2): INFO: recovery required on readonlyRE: SpaceLynk and Wiser For Knx BACnet release - Daniel - 21.02.2020
In this HW everything is stored in SD, there was no SPI flash on imx28.