Logic Machine Forum
KNX/TP Transmitter error - Printable Version

+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: KNX/TP Transmitter error (/showthread.php?tid=2563)



KNX/TP Transmitter error - MarcusH - 03.04.2020

Hi,

I got an LM5p2-KC which uses CANx and KNX tp

CANX and KNX is working fine, but i keep getting this error in the error log. And i don't know why. Theres only 4 Elsner temp/humid sensor on the TP bus.

[Image: GDqZvRk.png]

Here is settings.

[Image: trakK4J.png]


RE: KNX/TP Transmitter error - Daniel - 03.04.2020

It is not happening often so it is hard to identify such error. Check the voltage on the bus, make sure correct cable is used for KNX.