+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Scripting (https://forum.logicmachine.net/forumdisplay.php?fid=8)
+--- Thread: Shutters control via LM Reactor Lite (/showthread.php?tid=266)
Shutters control via LM Reactor Lite - buuuudzik - 08.04.2016
Hello,
your company Embedded Systems in your materials about hotel solution show that there is an option to control the shutters via the LM Reactor Lite not only with sending KNX telegrams but it is possibility to use LM Reactor Lite as a actuator and connect the blind to the LM outputs.
Do you have some script of such shutter controller? Are there no problems with a delays? What is the precision of this controller? It is possible to have a lamellas angle status?
RE: Shutters control via LM Reactor Lite - edgars - 08.04.2016
We made this functionality usually in start-stop mode. So if you need to make some basic functionality like protection from concurrent up/down launching , automatic stop after specified time interval etc. this can be easily done over scripting. If you need to receive statuses there should be some specific controller or motor used in this case.