+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: DALI power supply (/showthread.php?tid=268)
DALI power supply - kbyberg - 08.04.2016
Hello.
For connecting dali ballasts to LM4 i've tried both Wago 787-1007 and Helvar digidim 402 power supplies. Is it just Tridonic PS2 that is compatible? Or should Helvar digidim 402 be able to fix it?
I read the question in FAQ's, and for me it is not entirely clear what functions i need to look for when i choose power supply. Is there any specifications of what i should look for?
RE: DALI power supply - admin - 08.04.2016
I'm not sure about Helvar, but Wago 787-1007 is a power supply for Wago DALI master. It is just a plain power supply that does not have the required components to allow DALI communication. We recommend Tridonic PS2 because we've done a lot of tests with it, but it does not mean that it is the only power supply that will work with LogicMachine.
RE: DALI power supply - Peter - 09.04.2016
Hello Kbyberg,
we are succesfully using Helvar Digidim 402 for some time already.
RE: DALI power supply - kbyberg - 10.04.2016
Okey, thank you.
I've connected it like the diagram in the manual for LM4, but still i can't find any devices when i'm scanning in the configurator. I use the internal gateway.
At this time i have only connected one ballast. Are there any restrictions in terms of minimum number of ballasts ?
RE: DALI power supply - Peter - 12.04.2016
No, there are not. It should work fine also with only one ballast. Check the wiring, you should only connect DA+ and DA-, not SC connector.