![]() |
|
Logic Machine Ambient not taken upgraded img file - Printable Version +- LogicMachine Forum (https://forum.logicmachine.net) +-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1) +--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2) +--- Thread: Logic Machine Ambient not taken upgraded img file (/showthread.php?tid=3193) |
Logic Machine Ambient not taken upgraded img file - Rajesh - 24.02.2021 We are attempting to flash firmware in LM Ambient, but whenever we try to flash the firmware an error shows up saying invalid file. Can you please share new firmware file with us. The fimware we tried to upload were. 1) lmwall-20200720 2)lmwall-20170620 We have followed instruction provided by the following link https://openrb.com/reflash-logicmachine3-and-streaming-player-software/ RE: Logic Machine Ambient not taken upgraded img file - Daniel - 24.02.2021 In USBit you should use image recovery from here https://openrb.com/firmwares/ RE: Logic Machine Ambient not taken upgraded img file - Rajesh - 25.02.2021 we get error while doing img rcovery." "Cannot upgrade, firmware image file is invalid" RE: Logic Machine Ambient not taken upgraded img file - admin - 25.02.2021 Which hardware model exactly do you have? Which recovery image have you used? RE: Logic Machine Ambient not taken upgraded img file - Rajesh - 25.02.2021 (25.02.2021, 07:36)admin Wrote: Which hardware model exactly do you have? Which recovery image have you used? LM Ambient V1.2,1708,2501 1.lmwall20200720 2.lmwall20170620 RE: Logic Machine Ambient not taken upgraded img file - Daniel - 25.02.2021 Can you find serial number? There should be a label on LAN port. RE: Logic Machine Ambient not taken upgraded img file - Rajesh - 25.02.2021 (25.02.2021, 11:10)Daniel. Wrote: Can you find serial number? There should be a label on LAN port. LM4LW_v1.4 LM4LWV141709323 RE: Logic Machine Ambient not taken upgraded img file - Daniel - 25.02.2021 Use this recovery image https://dl.openrb.com/recovery-imx6-1g.img.gz and then this firmware https://dl.openrb.com/lm-20-imx6/lmwallv2-20201111.img RE: Logic Machine Ambient not taken upgraded img file - Rajesh - 27.02.2021 Please shaer the Recovery img. and Firmwar for following serial no. LM4LW v1.4 LM4LWV142006184 RE: Logic Machine Ambient not taken upgraded img file - admin - 27.02.2021 See Daniel's post, he has already provided both links that you need. RE: Logic Machine Ambient not taken upgraded img file - Batko - 31.03.2026 LM Wall (Ambient) - ![]() can you send me dwg file for this device ? im now cant turn on. RE: Logic Machine Ambient not taken upgraded img file - admin - 31.03.2026 If your device does not start then most likely you need to replace the micro SD card. Use a new card up to 32GB, preferably industrial or high endurance. Follow this guide and use recovery image for old CPU (i.MX28): https://kb.logicmachine.net/misc/reflash-lm-and-streaming-player/ You can find firmware here: https://logicmachine.net/downloads#firmware Look for LogicMachine firmware version 2024.04 / LM Wall (Ambient) RE: Logic Machine Ambient not taken upgraded img file - Batko - 01.04.2026 (31.03.2026, 10:09)admin Wrote: If your device does not start then most likely you need to replace the micro SD card. Use a new card up to 32GB, preferably industrial or high endurance. I think the board that controls the LAN port is burned out. We tried powering the 24V input, but the board flickered once and then that was it. We tried replacing the flash drive, but to no avail. RE: Logic Machine Ambient not taken upgraded img file - admin - 01.04.2026 If you want your device repaired then contact us via email. We will give an estimate price for repairs and shipping. |