+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: Micro SD Card Selection (/showthread.php?tid=3209)
Micro SD Card Selection - manos@dynamitec - 09.03.2021
Hello All,
I have looked on the forum and could not find a proper and complete answer for which is a solid micro SD card to be used as replacement of the original (after going dead).
So what I know so far is that the max capacity must not exceed 32GB and that the Class U10 speed is more than enough.
I am looking for a reasonable priced micro SD card but as solid as possible.
Will the cards bellow be fully compatible and solid;
Kingston 8GB Industrial Temperature UHS-I
SanDisk Extreme® PRO microSDXC™ UHS-I 32GB
Samsung Pro Endurance microSDHC 32GB
Are there any other alternatives or easy to be found micro SD cards at 8GB/16GB?
Regards
RE: Micro SD Card Selection - admin - 09.03.2021
SanDisk and Samsung should be fine, we do not recommend Kingston cards
RE: Micro SD Card Selection - edgars - 10.03.2021
Here are some recommended brands/types of pSLC/QMLC cards. We have used these and didnt have any failure up to now. You can use also SLC type cards, but the price will be much higher.
- WD/Sandisk SDSDQED-008G-XI
- Hagiwara MSDB-004GS(N00QZS
- Advantech SQF-MSDU1-2G-21C
- Swissbit
RE: Micro SD Card Selection - manos@dynamitec - 10.03.2021
(10.03.2021, 09:14)edgars Wrote: Here are some recommended brands/types of pSLC/QMLC cards. We have used these and didnt have any failure up to now. You can use also SLC type cards, but the price will be much higher.
- WD/Sandisk SDSDQED-008G-XI
- Hagiwara MSDB-004GS(N00QZS
- Advantech SQF-MSDU1-2G-21C
- Swissbit
Thank you for the quick reply. Your recommendations are noted! Yes SLC cards are very expensive.
Regards