+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Scripting (https://forum.logicmachine.net/forumdisplay.php?fid=8)
+--- Thread: Group Address massive change (/showthread.php?tid=3513)
Group Address massive change - jmir - 17.08.2021
Hi,
Is there any way to change names and group address from objects to replicate projects?
For example on an office building where there is LM on each floor, we need to have the same visualitzation, .... but KNX addresses are different:
Logic Machine1 Logic Machine 2 Logic Machine N
1/5/1 -->Floor01.Office1.Real_Temperature 2/5/1 -->Floor02.Office1.Real_Temperature N/5/1 -->Floor02.Office1.Real_Temperature
1/5/2 -->Floor01.Office1.Setpoint 2/5/2 -->Floor02.Office1.Setpoint N/5/2 -->Floor02.Office1.Setpoint
..... ..... .....
1/5/21 -->Floor01.Office2.Real_Temperature 2/5/21 -->Floor02.Office2.Real_Temperature N/5/21 -->Floor02.Office1.Real_Temperature
1/5/22 -->Floor01.Office2.Setpoint 2/5/22 -->Floor02.Office2.Setpoint N/5/22 -->Floor02.Office1.Setpoint
..... ..... .....
The aim is to have, for example, Floor 1 project done and then import it to Floor 2 LM and change all group addresses whitout relink them to visualitzation objects, modbus mappings, ...
Thanks.
RE: Group Address massive change - admin - 18.08.2021
See this: https://forum.logicmachine.net/showthread.php?tid=2717&pid=17512#pid17512