+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: Problem KNX connection (/showthread.php?tid=3704)
Problem KNX connection - Frank68 - 24.11.2021
Greetings
I have problems connecting to port 3671 of a device from ETS I have set the use of NAT but nothing, the connection manager is FASTWEB already open on the router ports 81 redirected for the web and 102 for siemens PLC no problem.
They say 3671 is open but it doesn't work.
Some idea?
RE: Problem KNX connection - Daniel - 24.11.2021
https://forum.logicmachine.net/showthread.php?tid=3670&pid=23875#pid23875
Use ZeroTier instead.
RE: Problem KNX connection - Erwin van der Zwart - 24.11.2021
Just to be sure, what HW do you have? Is it a LM or a W4K/SL?
If you are using a Schneider device with FW higher then 2.6.0 you probably run into our tightent cyber security rules where we don't allow port forwarding 3671 to the public internet anymore, and given recent KNX hacks you should be happy about that (:
We advice to use VPN to have secure access to your site or if that is impossible use a KNX Secure interface.
RE: Problem KNX connection - khalil - 14.12.2021
(24.11.2021, 12:56)Erwin van der Zwart Wrote: Just to be sure, what HW do you have? Is it a LM or a W4K/SL?
If you are using a Schneider device with FW higher then 2.6.0 you probably run into our tightent cyber security rules where we don't allow port forwarding 3671 to the public internet anymore, and given recent KNX hacks you should be happy about that (:
We advice to use VPN to have secure access to your site or if that is impossible use a KNX Secure interface.
could the LM, W4KNX/SL be the Secure KNX interface?. is there a plan in the future releases?
RE: Problem KNX connection - Daniel - 14.12.2021
Via multicast we use KNX secure but not via Tunneling. Plans yes not ETA