Waterkotte Ecotouch Heatpump - Printable Version

Waterkotte Ecotouch Heatpump - Printable Version

+- LogicMachine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Scripting (https://forum.logicmachine.net/forumdisplay.php?fid=8)
+--- Thread: Waterkotte Ecotouch Heatpump (/showthread.php?tid=3919)

Waterkotte Ecotouch Heatpump - pioneersteffen - 06.03.2022

Hi @all,

I want to connect my Waterkotte Ecotouch heatpump to LM/W4k. I have a working .php script what is running on my Raspberry. This script I want to transfer to LM.

To start with: My goal is to read "TEMPERATURE_OUTSIDE" and write it to a group address and write "ENABLE_HEATING" from a group address.

Is this possible? Has anybody an idea how to start?

Many thanks for your help!

Best Regards
Steffen

RE: Waterkotte Ecotouch Heatpump - admin - 07.03.2022

Try running this code and post what you get in Logs. Change ip, user and pwd variables as needed.

Code:
http = require('socket.http')

ip = '192.168.178.100' -- ip address of Waterkotte heat pump
user = 'XXX' -- username of web interface
pwd = 'XXX' -- password of web interface

url = 'http://' .. ip .. '/cgi/login?username=' .. user .. '&password=' .. pwd

res, code = http.request(url)

log('login request', res, code)

if res and code == 200 then
  token = res:match('%x+')

  log('token', token)

  if type(token) == 'string' and #token == 32 then
    storage.set('ecotouch-token', token)
  end
end

if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A1'

  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)
end

RE: Waterkotte Ecotouch Heatpump - pioneersteffen - 07.03.2022

@admin: Many thanks for your help.

I getting a login failure, here is the log:

Code:
Waterkotte 07.03.2022 16:22:21
* arg: 1
  * string: login request
* arg: 2
  * string: 1
#S_OK
IDALToken=d98d4aa1b188273a90c0440da3f3f9d0
* arg: 3
  * number: 200
Waterkotte 07.03.2022 16:22:21
* arg: 1
  * string: token
* arg: 2
  * string: 1
Waterkotte 07.03.2022 16:22:21
* arg: 1
  * string: read request
* arg: 2
  * string: #E_NEED_LOGIN

* arg: 3
  * number: 500

If I do the steps manual via Firefox browser:
1.)

Code:
http://192.168.XXX.XX/cgi/login?username=XXX&password=XXX

[url=http://192.168.178.35/cgi/readTags?n=1&t1=A1][/url]

2.)

Code:
http://192.168.XXX.XX/cgi/readTags?n=1&t1=A1

the return is:

Code:
#A1    S_OK
192    80

The failure "E_NEED_LOGIN" I getting also in the browser when I don't do step 1 before step 2.

RE: Waterkotte Ecotouch Heatpump - admin - 08.03.2022

Change line 14 to this and try again:

Code:
token = res:match('IDALToken=(%x+)')

RE: Waterkotte Ecotouch Heatpump - pioneersteffen - 08.03.2022

@admin: Many thanks, now the login works successful!

Code:
Waterkotte 08.03.2022 10:01:43
* arg: 1
  * string: login request
* arg: 2
  * string: 1
#S_OK
IDALToken=d09570725af35fbaf13ba699ed6c2a0e
* arg: 3
  * number: 200
Waterkotte 08.03.2022 10:01:43
* arg: 1
  * string: token
* arg: 2
  * string: d09570725af35fbaf13ba699ed6c2a0e
Waterkotte 08.03.2022 10:01:43
* arg: 1
  * string: read request
* arg: 2
  * string: #A19    S_OK
192    363

* arg: 3
  * number: 200

„363“ is the value I want to parse and write it to a group address.

@admin: Do you have an idea how to do that?

RE: Waterkotte Ecotouch Heatpump - admin - 08.03.2022

Add after log('read request', res, code), if it works then you can replace log(value) with grp.checkwrite or grp.checkupdate.

Code:
value = res:match('S_OK%s+%d+%s+(%d+)')
if value then
  value = tonumber(value)
  log(value)
end

RE: Waterkotte Ecotouch Heatpump - pioneersteffen - 10.03.2022

@admin: Many thanks again for your big help! Highly appreciated!

I made two script sets out of it.

The first one is to read the actual values I'm interested in:

Code:
http = require('socket.http')

ip = 'xxx' -- ip address of Waterkotte heat pump
user = 'xxx' -- username of web interface
pwd = 'xxx' -- password of web interface

url = 'http://' .. ip .. '/cgi/login?username=' .. user .. '&password=' .. pwd

res, code = http.request(url)

log('login request', res, code)

if res and code == 200 then
  token = res:match('IDALToken=(%x+)')

  log('token', token)

  if type(token) == 'string' and #token == 32 then
    storage.set('ecotouch-token', token)
  end
end

-- Read actual hot water temperature ****************************
if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A19'

  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)
    
value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
      grp.checkupdate('46/1/1', value/10)

   end
end

os.sleep(1)      


-- Read actual source in temperature ****************************

if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A4'
  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)

value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
      grp.checkupdate('46/1/2', value/10)

   end
end
os.sleep(1)      


-- Read actual source out temperature ****************************

if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A5'
  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)

value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
      grp.checkupdate('46/1/3', value/10)

   end
end
os.sleep(1)      


-- ************************************************************

-- Read actual return temperature ****************************

if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A11'
  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)

value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
      grp.checkupdate('46/1/4', value/10)

   end
end
os.sleep(1)      

-- Read actual flow temperature ****************************

if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A12'
  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)

value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
      grp.checkupdate('46/1/5', value/10)

   end
end
os.sleep(1)      


-- ************************************************************

-- Read actual power compressor ****************************

if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A25'
  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)

value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
      grp.checkupdate('46/1/6', value/10)

   end
end
os.sleep(1)      

-- Read actual power heating****************************

if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A26'
  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)

value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
      grp.checkupdate('46/1/7', value/10)

   end
end
os.sleep(1)      

-- Read actual COP***************************

if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A28'
  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)

value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
      grp.checkupdate('46/1/8', value/10)

   end
end


-- Read desrired hot water temperature ****************************
if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=A37'

  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)
    
value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
      grp.checkupdate('46/3/1', value/10)

   end
end

os.sleep(1)    


-- Read status heeting mode****************************
if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=I30'

  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)
    
value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
        if value == 1
            then 
            value = true
            elseif 
            value == 0
            then 
            value = false
        end
      grp.checkupdate('46/3/2', value)

   end
end

os.sleep(1)    


-- Read status cooling mode****************************
if token then
  url = 'http://' .. ip .. '/cgi/readTags?n=1&t1=I31'

  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)
    
value = res:match('S_OK%s+%d+%s+(%d+)')
   if value then
      value = tonumber(value)
   -- log(value)
        if value == 1
            then 
            value = true
            elseif 
            value == 0
            then 
            value = false
        end
      grp.checkupdate('46/3/3', value)

   end
end

os.sleep(1)   

And the second one to write the desired values:

Code:
http = require('socket.http')

ip = 'xxx' -- ip address of Waterkotte heat pump
user = 'xxx' -- username of web interface
pwd = 'xxx' -- password of web interface

url = 'http://' .. ip .. '/cgi/login?username=' .. user .. '&password=' .. pwd

res, code = http.request(url)

log('login request', res, code)

if res and code == 200 then
  token = res:match('IDALToken=(%x+)')

  log('token', token)

  if type(token) == 'string' and #token == 32 then
    storage.set('ecotouch-token', token)
  end
end
os.sleep(1) 

-- Write enable heating mode ****************************
setvalue = grp.getvalue('46/2/2')
if setvalue == true 
then setvalue = 1
    else setvalue = 0
end

if token then
  url = 'http://' .. ip .. '/cgi/writeTags?returnValue=true&n=1&t1=I30&v1='..setvalue

  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })

  log('read request', res, code)
    
end
os.sleep(1) 

-- Write enable cooling mode ****************************

setvalue = grp.getvalue('46/2/3')
if setvalue == true 
then setvalue = 1
    else setvalue = 0
end
if token then
  url = 'http://' .. ip .. '/cgi/writeTags?returnValue=true&n=1&t1=I31&v1='..setvalue
  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })
  log('read request', res, code)
end
os.sleep(1) 

-- Write water temperature****************************

setvalue = grp.getvalue('46/2/1') 
setvalue = setvalue *10

if token then
  url = 'http://' .. ip .. '/cgi/writeTags?returnValue=true&n=1&t1=A38&v1='..setvalue
  res, code = http.request({
    url = url,
    headers = {
      ['Cookie'] = 'IDALToken=' .. token
    }
  })
  log('read request', res, code)
end

Generally it works fine EXCEPT when the time between two request is to short I getting the following return in the log and the values are not written to the heatpump:

Code:
Waterkotte_Sollwerte 10.03.2022 20:23:55
* arg: 1
  * string: login request
* arg: 2
  * string: -37
#E_TOO_MANY_USERS
* arg: 3
  * number: 200

@admin: Do you have an idea how to control the situation? Do I need to detect: "#E_TOO_MANY_USERS" and then wait some second and resend? How would this look like? Many thanks for your help!

RE: Waterkotte Ecotouch Heatpump - admin - 11.03.2022

The login procedure should not be performed for each request. The token is already saved into storage so it should be used in read/write requests. If the request fails with an error then the token should be refreshed.