+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: Wiser for KNX boot failure (/showthread.php?tid=3992)
Wiser for KNX boot failure - Kir - 13.04.2022
Hi.
After several power failures my LSS100100 (HW 1.1) controller is not work propertly: web-interface randomly freezes, blank pages, settings is not stored after reboot. So, i conclude, that SD-card is broken and replaced it with new-one (16 GB samsung 10 class). I flashed SD-card with recovery-image https://www.se.com/hk/en/download/document/AN2_001/ than opened recovery page 192.168.0.10 and chosed new firmware https://www.se.com/ww/en/download/document/FW2_7_0-HW_1_X_X-w4k/ process started and than after 2 minutes controller rebooted and now only blinking with two LEDs (LED1 and internal LED) with 3 seconds period. Ethernet LEDs is also off and no pings to 192.168.0.10 presented. What i am doing wrong?
with best regards
Kiryl
RE: Wiser for KNX boot failure - Daniel - 13.04.2022
If you fallowed the description in the AN then there is not much can be done. Can be HW damage.