+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: 1-wire tab is no longer visible in LM interface (/showthread.php?tid=4868)
1-wire tab is no longer visible in LM interface - ro_ki@tut.by - 11.07.2023
Hello,
After SW upgrade I do not see 1-wire tab in LM settings.
I still have some 1-wire mapping working fine but can't find where it is stored now.
HW: LM5 Lite + Ext (i.MX6)
SW: 20230420
Best regards,
Kirill
RE: 1-wire tab is no longer visible in LM interface - Daniel - 11.07.2023
Since this hardware does not have 1-wire it is no longer present in this fw. You can install it manually from additional packages.
RE: 1-wire tab is no longer visible in LM interface - ro_ki@tut.by - 11.07.2023
Daniel, actually I have LM5 DW1 with 1-wire output.
Did I select a wrong firmware?
RE: 1-wire tab is no longer visible in LM interface - Daniel - 11.07.2023
Looks like as above you wrote this HW: LM5 Lite + Ext (i.MX6)
RE: 1-wire tab is no longer visible in LM interface - ro_ki@tut.by - 11.07.2023
Yes, it is misleading . Text above is copied from System Upgrade window .
The device itself has LM5p2-DW1 tag on it and 2 1-wire connections.
RE: 1-wire tab is no longer visible in LM interface - Daniel - 11.07.2023
Yes you are right, try installing fw again or the package manually, something seems broken.
RE: 1-wire tab is no longer visible in LM interface - ro_ki@tut.by - 11.07.2023
Thank you , which package you would recommend to install?
RE: 1-wire tab is no longer visible in LM interface - Daniel - 11.07.2023
https://dl.openrb.com/lm-23-imx6/pkg/
genohm-scada-w1_20181221
RE: 1-wire tab is no longer visible in LM interface - ro_ki@tut.by - 11.07.2023
Thank you, it works. All the best!