+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: HDL Zigbee Valve not working properly (/showthread.php?tid=5008)
HDL Zigbee Valve not working properly - Andrea Becagli - 06.10.2023
Hi,
I am trying to use 9 HDL Zigbee Valves but I am having problems using 5 of them. They seem to have different firmware from the others and I will probably need another JSON profile for them. I will attach the logs and series of photos to better explain the problem.
hdl zigbee valve.zip (Size: 358.77 KB / Downloads: 6)RE: HDL Zigbee Valve not working properly - admin - 06.10.2023
We will add MIGT05.19 to the same profile as Rti-Tek Thermostat. Consider adding a ZigBee router/repeater to your installation as your signal levels are really low and the communication might be unstable. Any permanently powered ZigBee device will do (smart plug, etc).
RE: HDL Zigbee Valve not working properly - Andrea Becagli - 06.10.2023
(06.10.2023, 09:57)admin Wrote: We will add MIGT05.19 to the same profile as Rti-Tek Thermostat. Consider adding a ZigBee router/repeater to your installation as your signal levels are really low and the communication might be unstable. Any permanently powered ZigBee device will do (smart plug, etc).
Great! Thank you for the short time answer. How long will it take though? Will I need to install another ipk? and finally will I need to re-do the initial configuration?
RE: HDL Zigbee Valve not working properly - admin - 06.10.2023
New app version should be released in a week or so. You will need to install new app then reset and pair all MIGT05.19 devices again.
RE: HDL Zigbee Valve not working properly - Andrea Becagli - 06.10.2023
OK, Thank you please let me know when you publish it. Would an IKEA TRÅDFRI E27 806 lumen work as a repeater for the mesh ZigBee network?
RE: HDL Zigbee Valve not working properly - admin - 06.10.2023
It should work, just make sure that it is always powered up.
RE: HDL Zigbee Valve not working properly - Andrea Becagli - 16.10.2023
Any news on the update?
RE: HDL Zigbee Valve not working properly - admin - 16.10.2023
New ZigBee app has been published, see if your valve works now.