+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: Recovery img Wiser for KNX HW version V3.2? (/showthread.php?tid=5144)
Recovery img Wiser for KNX HW version V3.2? - edyzee11 - 11.12.2023
Best regard,
I have an LS100100 installed where a client and from one day to the next it stopped working, it has already happened to me twice with this equipment. The first time I fixed it by changing the memory and recovering the firmware in a new memory. ¿What is the firmware for this version of HW and why this may be present?. At the moment this equipment is only working as a line coupler, it does not have any type of programming.
RE: Recovery img Wiser for KNX HW version V3.2? - Daniel - 11.12.2023
Latest firmware you will find on se.com and it should be 2.8.3
RE: Recovery img Wiser for KNX HW version V3.2? - edyzee11 - 11.12.2023
And the image file to load into memory and start the computer again, what is it?
RE: Recovery img Wiser for KNX HW version V3.2? - Daniel - 11.12.2023
Use the one for imx6
https://kb.logicmachine.net/misc/reflash-lm-and-streaming-player/
RE: Recovery img Wiser for KNX HW version V3.2? - edyzee11 - 11.12.2023
Thank you Mr DanielÂ
God bless you