+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: DALI2 KCD (/showthread.php?tid=5335)
DALI2 KCD - joaodaniel.pereira - 03.04.2024
Hi,
I have a KCD device, I'm trying to read a DALI2 equipment.
It's possible ?
I set the 0.1 DALY GATEWAY (INTERNAL) ... But the scan DALI2 return 0 elements !
RE: DALI2 KCD - admin - 03.04.2024
What kind of device are you connecting? What DALI power supply is used?
RE: DALI2 KCD - joaodaniel.pereira - 04.04.2024
(03.04.2024, 14:16)admin Wrote: What kind of device are you connecting? What DALI power supply is used?
Hi,
I'm trying to read:
https://www.tridonic.com/en/int/product/22213?tab=0
and
Steinel IR Quattro HD DALI
The power supply is an industrial with 16V 240mA DC
RE: DALI2 KCD - admin - 04.04.2024
You need to use a DALI power supply with LM KCD.
Also note that all ballasts (even DALI2) are under the Devices tab, while DALI2 sensors are under the DALI2 tab. You need to run the scan in both tabs to detect all devices.
RE: DALI2 KCD - joaodaniel.pereira - 04.04.2024
Ok,
I'm using the Foxtron DALI power supply. The tridonic (light) driver is working but the other sensor is not detected.. any idea why ?
RE: DALI2 KCD - admin - 04.04.2024
Steinel IR Quattro HD is a stand-alone solution that controls ballasts directly.
You need a different sensor similar to this: https://www.lunatone.com/en/product/dali-2-cs-integration/