+- LogicMachine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Scripting (https://forum.logicmachine.net/forumdisplay.php?fid=8)
+--- Thread: I would like to use LM5 as a SIP server. (/showthread.php?tid=5622)
I would like to use LM5 as a SIP server. - Takayuki Miura - 18.09.2024
Hello!
I would like to use LM5 as a SIP server to relay communication between two SIP Devices.
Specifically, I would like to use one doorbird and one phone.
If the IP addresses of each device are as follows, what kind of environment should I build?
LM5: 192.168.0.11
Doorbird: 192.168.0.27
Phone: 192.168.0.51
I have only completed the [SIP package installation on LM] by following the link below.
https://openrb.com/sip-server-on-logicmachine/
I look forward to your reply.
Thanks,
RE: I would like to use LM5 as a SIP server. - admin - 18.09.2024
On both clients set server IP to LM IP. Username should be a unique numeric value, no password. Clients can make calls between each other using username as a phone number.
RE: I would like to use LM5 as a SIP server. - Chandrias - 08.10.2026
(18.09.2024, 13:30)admin Wrote: On both clients set server IP to LM IP. Username should be a unique numeric value, no password. Clients can make calls between each other using username as a phone number.
I tried to register my devices with these settings but I get a "Registration Failed" message on both of them.
Is there a way to troubleshoot and see where thinks are not working properly?
RE: I would like to use LM5 as a SIP server. - Chandrias - 12.10.2026
(18.09.2024, 13:30)admin Wrote: On both clients set server IP to LM IP. Username should be a unique numeric value, no password. Clients can make calls between each other using username as a phone number.
I don't think that the issue has to do with my network. I connected all devices to a new network and the still can not register to the SIP Server
RE: I would like to use LM5 as a SIP server. - Daniel - 12.10.2026
Unfortunately there is nothing more we can suggest then the instructions here.
https://kb.logicmachine.net/integration/sip-server/
It is very basic SIP server but many customers use it with a success.
RE: I would like to use LM5 as a SIP server. - Chandrias - 12.10.2026
(12.10.2026, 07:45)Daniel Wrote: Unfortunately there is nothing more we can suggest then the instructions here.
https://kb.logicmachine.net/integration/sip-server/
It is very basic SIP server but many customers use it with a success.
I moved both devices at my residence and i managed to configure the server and register the devices.
Is there a way to confirm that my office server runs the required processes?
RE: I would like to use LM5 as a SIP server. - Daniel - 12.10.2026
Are you sure that LM in your office has internet access? Without internet access LM cannot install the packages.