+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: Knx secure over ip (/showthread.php?tid=5652)
Knx secure over ip - gjniewenhuijse - 04.10.2024
Just a question before i made this.
I have 2 logicmachines connected over ip.
LM1: have 2 secure groupaddresses 10/7/1 and 10/7/2 and i can monitor and control these groupaddress in the lm, because i use the dummy from the example.
LM2: how to control and monitor 10/7/1 and 10/7/2 from LM2? Do i need to configure something to get this working?
RE: Knx secure over ip - admin - 04.10.2024
You need dummy devices for both LMs. Import same ETS project into both LMs.
RE: Knx secure over ip - gjniewenhuijse - 06.10.2024
Under Utilities there is an option to transfer group addresses from logic machine 1 to logic machine 2 via remote services. This works, but not for secure group addresses. Secure group addresses are then suddenly not secure.
How to solve this? My goal is to have both lm’s with the same groupaddresses, without do maintenance on both.
RE: Knx secure over ip - admin - 07.10.2024
Each KNX secure device has a sending sequence number that is required for secure communication. It cannot be added manually or via object import. You must import ETS project into both LMs.