+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: PowerTag rope (A9MEM1591) modbus register (/showthread.php?tid=5795)
PowerTag rope (A9MEM1591) modbus register - Krists - 18.12.2024
Hello.
An energy sensor is installed - PowerTag Rope 600A 3P/3P+N [A9MEM1591] and connected to EcoStruxure Panel Server [PAS600].
Everything works - data is displayed!
When transferring data via Modbus TCP to the SpaceLynk controller, reactive power (received, returned) and a few other things are not read.
I understand that the existing powertag profile of SpaceLynk needs to be corrected. But I can't find the necessary modbus register addresses for the specific powertag sensor anywhere!
Has anyone had a similar situation?
Thanks
RE: PowerTag rope (A9MEM1591) modbus register - FatMax - 18.12.2024
You can find it here:
https://www.se.com/no/no/download/document/DOCA0241EN/
RE: PowerTag rope (A9MEM1591) modbus register - Krists - 20.12.2024
(18.12.2024, 12:54)FatMax Wrote: You can find it here:
https://www.se.com/no/no/download/document/DOCA0241EN/
Thank you.
After a long reading process I got into the topic.
Now all the data is showing.