+- LogicMachine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Visualization (https://forum.logicmachine.net/forumdisplay.php?fid=9)
+--- Thread: camera acquisition on reactor (/showthread.php?tid=6243)
camera acquisition on reactor - Frank68 - 09.01.2026
Hi, I'd like to buy a Hikvision camera on the reactor.
I tried the following string, but it doesn't work.
rtsp://user:password@IP:554/0/1
What's wrong?
Thanks
RE: camera acquisition on reactor - admin - 09.01.2026
You can't use RTSP stream because the browser does not support this protocol. Usually you can only use snapshot that is accessible via HTTP.
RE: camera acquisition on reactor - CristianAgata - 10.01.2026
(09.01.2026, 14:42)Frank68 Wrote: Hi, I'd like to buy a Hikvision camera on the reactor.
I tried the following string, but it doesn't work.
rtsp://user:password@IP:554/0/1
What's wrong?
Thanks
Hi Frank68,
Use this string in Visu -> Camera Snapshot. You can use refresh 1 sec and it works fine.
http://camera_ip_address:port/ISAPI/Streaming/channels/101/picture?videoResolutionWidth=300&videoResolutionHeight=400
Best regards Cristian