+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Amati.linea Streaming Player (https://forum.logicmachine.net/forumdisplay.php?fid=18)
+--- Thread: Button input (/showthread.php?tid=642)
Button input - dalahoo - 23.02.2017
Hi
I want to use button input to play/pause music and use wiring diagram of datasheet but it's not working. What should i do?
RE: Button input - edgars - 24.02.2017
did you enable specific button control in Quick Setup?
How did you connect wires (one wire to Button port, another to GND port?)
RE: Button input - dalahoo - 27.02.2017
(24.02.2017, 09:00)edgars Wrote: did you enable specific button control in Quick Setup?
How did you connect wires (one wire to Button port, another to GND port?)
yes i enabled them in Quick Setup
yes i connect one wire to button port and another to GND portÂ
RE: Button input - admin - 27.02.2017
What power supply are you using? The button inputs were designed to work with 24V and might not work with lower voltage.
RE: Button input - dalahoo - 08.03.2017
(27.02.2017, 07:20)admin Wrote: What power supply are you using? The button inputs were designed to work with 24V and might not work with lower voltage.
ooooh i use 12v power supply. I will change it. thanks