+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: Gira touch sensor backlight (/showthread.php?tid=772)
Gira touch sensor backlight - 02dag - 04.05.2017
I am wondering if one can script turning off or dim the backlight on this sensor or do I need to program this in ETS? does someone know if it is even possible?
The backlight is very strong when the room is completely dark.
RE: Gira touch sensor backlight - admin - 04.05.2017
Unless it can be controlled via a KNX object there's nothing you can do apart from changing some parameters in ETS.
RE: Gira touch sensor backlight - 02dag - 05.05.2017
(04.05.2017, 07:39)U admin Wrote: Unless it can be controlled via a KNX object there's nothing you can do apart from changing some parameters in ETS.
I did sone more research, and it is possible to enable the control of the LED and illumination AS a knx object. This have to be done from ETS, when this is done you can control it from your reactor or lm