widget template

[Frank68]

Hi I'm trying to use widgets, and I find it particularly reductive to have to create a widget for each shutter, since the connection to the object is given in the widget, there is a way to pass the parameters not inside the widget but to its use.



I attach an example image

Tank's

[admin]

Does your shutter actuator support 4-bit objects? If so you can just use 4-bit control which has +/- buttons for control via press and hold.

[Frank68]

Does your shutter actuator support 4-bit objects? If so you can just use 4-bit control which has +/- buttons for control via press and hold.

My problem I have 3 different bit up/down/stop
and 1 bit for status open/close

some idea ?

[admin]

You can create a script to convert 4-bit to 1-bit. In visualization object select 4-bit as Main object and 1-bit as Status object. This way the icon will show the status.

Script to determine 4-bit action (stop/up/down). Change 1-bit addresses and values as needed.

Code:

value = tonumber(event.datahex, 16)

up = bit.band(value, 8) == 8
stop = bit.band(value, 7) == 0

if stop then
  grp.write('32/1/3', true)
elseif up then
  grp.write('32/1/4', true)
else
  grp.write('32/1/5', true)
end

[Frank68]

You can create a script to convert 4-bit to 1-bit. In visualization object select 4-bit as Main object and 1-bit as Status object. This way the icon will show the status.

Script to determine 4-bit action (stop/up/down). Change 1-bit addresses and values as needed.

Code:

value = tonumber(event.datahex, 16)

up = bit.band(value, 8) == 8
stop = bit.band(value, 7) == 0

if stop then
  grp.write('32/1/3', true)
elseif up then
  grp.write('32/1/4', true)
else
  grp.write('32/1/5', true)
end

Hi but in this way need to create more script , i have more shutter and more windows , best solution is a tempplate widget , where is possible to connecto directly at the right address .
If it's possible I prefer not write more script.

Thank's

[Daniel]

Hi
There is no such thing what you are looking for. Some users created a scripts with direct database write where they shifted groups of a template page.  This will work only if you have certain pattern of object creation.
Here is an example
https://forum.logicmachine.net/showthrea...50#pid7450

Not sure what for but I wrote some script to shift visu objects based on selected shift. It may be useful to you.

Code:

planID = 8  --plan number shown after # in quisk visu preview http://URL/scada-vis/#6
visObjectType = 1  --all binary objects are type 0 and all numeric objects are type 1

--All Manin objects will be shifted by selected addres.
controlObjectMain = 0
controlObjectSub = 0
controlObjectAddress = 0

--Select shift for status object. If status object is not used in object visu it will be ignored.
statusObjectMain = 0
statusObjectSub = 0
statusObjectAddress = 0

------------------------------------------ End Parameters ------------------------------------------
------------------------------ DON'T CHANGE ANYTHING UNDER THIS LINE -------------------------------
dbobjects = db:getall('SELECT id, object, statusobject FROM visobjects WHERE floor = ' .. planID .. ' AND type = ' .. visObjectType .. '')
--log(dbobjects)
for _, tableData in ipairs(dbobjects) do
  oldControlAddress = tableData.object
  oldStatusAddress = tableData.statusobject
  currentRow = tableData.id
  newControlAddress = oldControlAddress + ((controlObjectMain * 2048) + (controlObjectSub * 256) + controlObjectAddress)
  newStatusAddress = oldStatusAddress + ((statusObjectMain * 2048) + (statusObjectSub * 256) + statusObjectAddress)
 
  log('oldControlAddress= '..tostring(oldControlAddress)..', currentRow= '..tostring(currentRow)..', newControlAddress= ' ..tostring(newControlAddress)..', newStatusAddress= ' ..tostring(newStatusAddress) )
  db:update('visobjects', { object = newControlAddress }, { id = currentRow })
  if (oldControlAddress == oldStatusAddress) then --if no status object selected main object must be used
  db:update('visobjects', { statusobject = newControlAddress }, { id = currentRow })
    else
  db:update('visobjects', { statusobject = newStatusAddress }, { id = currentRow })
    end

 
end 
log('update finished')
script.disable(_SCRIPTNAME)

Always make a backup before using any of this scripts.

BR