This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.
Logic Machine Forum › LogicMachine eco-system › Hardware v
device not booting blinking/flashing green diode

Threaded Mode
device not booting blinking/flashing green diode
Jpiotr Offline
Junior Member
Posts: 6
Threads: 2
Joined: Feb 2021
Reputation: 0
#1
15.11.2023, 13:58 (This post was last modified: 15.11.2023, 14:00 by Jpiotr.)
My device after power off is not booting blinking/flashing green diode. I made video:
https://youtu.be/tX7dhTB9Tqk?si=OouBCXSOQooyXu8x

Top (number 1) Green diode 1 second ON and 3 seconds OFF
Find
Reply
AEK Offline
Member
Posts: 155
Threads: 12
Joined: Sep 2015
Reputation: 13
#2
15.11.2023, 14:07
(15.11.2023, 13:58)Jpiotr Wrote: My device after power off is not booting blinking/flashing green diode. I made video:
https://youtu.be/tX7dhTB9Tqk?si=OouBCXSOQooyXu8x

Top (number 1) Green diode 1 second ON and 3 seconds OFF
it could be SD card problem. try to reflash it, but you need Schneiders Firmware
https://openrb.com/reflash-logicmachine3...-software/
Find
Reply
Jpiotr Offline
Junior Member
Posts: 6
Threads: 2
Joined: Feb 2021
Reputation: 0
#3
20.11.2023, 10:11 (This post was last modified: 20.11.2023, 10:21 by Jpiotr.)
Thanks AEK. Probably some issue with microSD immage. Tried W4K

Can somebody share microSD image for Wiser 4 KNX HW3.2 to load it via USB Image Tool?
Find
Reply
Daniel Offline
Administrator
Posts: 4572
Threads: 23
Joined: Aug 2017
Reputation: 206
#4
20.11.2023, 10:13
https://dl.openrb.com/recovery-imx6-1g.img.gz
------------------------------
Ctrl+F5
Find
Reply
Jpiotr Offline
Junior Member
Posts: 6
Threads: 2
Joined: Feb 2021
Reputation: 0
#5
20.11.2023, 20:52
(20.11.2023, 10:13)Daniel Wrote: https://dl.openrb.com/recovery-imx6-1g.img.gz


When i go to 192.168.0.10 i get
404 Not Found
nginx

LED1 constant green goes out only when LED inside casing blinks red.

https://www.youtube.com/watch?v=2QgB4WXvgx0
Find
Reply
Erwin van der Zwart Offline
Senior Member
Posts: 1759
Threads: 6
Joined: Jul 2015
Reputation: 115
#6
20.11.2023, 22:35
Try clearing browser cache (as always when experiencing strange behavior)
Find
Reply


Forum Jump: