Add scheduler with a single click ?

[Simuzer]

Hi all,

i can try adding scheduler into LM.

This example, there are 3 lamps and 3 sensors. And they a lot of my project in 3 LM. (over 500 objects for scheduler)



   

how to add schedule each lamp and sensor? One by one ?


   


Or, Is there a shortcut for scheduler to the object on the page?

Can we automatically add scheduler with a single click, as seen in the picture below?

   

thanks all you.

[admin]

Can be done via a script. This example creates a scheduler for objects from 0/0/1 to 0/0/5.

Code:

webrequest = require('webrequest')

for i = 1, 5 do
  address = '0/0/' .. i

  data = {
    object = buslib.encodega(address),
    active = 'on',
    controlobject = 0,
    name = 'Scheduler ' .. address,
    start_day = 1,
    start_month = 1,
    end_day = 31,
    end_month = 12,
  }

  webrequest('schedulers', 'save', { data = data })
end

[Simuzer]

Unfortunately this is not suitable for me. Because the addresses do not go in a certain order and the names must also be meaningful. But if it was a visual addition then things would be great. I hope such an option will be added in the future.

[admin]

The script can modified to create schedulers for a given tag and use object names as scheduler names. Alternatively a table with group address -> scheduler name mapping can be used to quickly create multiple schedulers.

[Simuzer]

Can be done via a script. This example creates a scheduler for objects from 0/0/1 to 0/0/5.

Code:

webrequest = require('webrequest')

for i = 1, 5 do
  address = '0/0/' .. i

  data = {
    object = buslib.encodega(address),
    active = 'on',
    controlobject = 0,
    name = 'Scheduler ' .. address,
    start_day = 1,
    start_month = 1,
    end_day = 31,
    end_month = 12,
  }

  webrequest('schedulers', 'save', { data = data })
end

how can i add object name for objects from 32/2/1 to 32/2/252.

I don't understand how to use the code below in the code above.

Code:

name = grp.find(event.dst).name

i want to use scheduler names as the name of the scheduler.

   


i added it manually.

   

[Daniel]

Code:

webrequest = require('webrequest')

for i = 1, 252 do
  address = '32/2/' .. i

  data = {
    object = buslib.encodega(address),
    active = 'on',
    controlobject = 0,
    name = grp.find(address).name,
    start_day = 1,
    start_month = 1,
    end_day = 31,
    end_month = 12,
  }

  webrequest('schedulers', 'save', { data = data })
end

[bvanden]

I would like to know who do we manage to add sub-items :
- active
- name
- run at (ezg specific time, sunrise, sunset)
- start time
- days of the week (all, Mo, Tu, ... Su)
-  week days of the month (all, 1st, 2nd, ...last)
- ...
- value

[admin]

Code:

webrequest = require('webrequest')

data = {
  value = '0', -- value to send
  scheduler = 1, -- parent scheduler ID
  name = 'new event',
  active = 'on', -- 'on' or 'off'
  type = '', -- '' (run at specific time), 'sunrise' or 'sunset'
  start_hour = 13, -- only for run at specific time
  start_min = 0, -- only for run at specific time
  offset_hour = -1, -- only for 'sunrise' or 'sunset'
  offset_min = 30, -- only for 'sunrise' or 'sunset'
  year = 0, -- 0 = all years, specific year otherwise
  months = '111111111111', -- Jan to Dec, 1 = on, 0 = off
  daysofmonth = '1111111111111111111111111111111', -- 1..31, 1 = on, 0 = off
  daysofweek = '1111111', -- Monday to Sunday, 1 = on, 0 = off
  dayweeknrs = '111111', -- week 1 to 5 in month, 6th value = Last week of the month, 1 = on, 0 = off
  holidays = '', -- '' (don't care), 'y' (run on holidays), 'n' (don't run on holidays)
}

res, err = webrequest('schedulers', 'events-save', { data = data })
log(res, err)