Yesterday, 12:06
Good afternoon,
I have a question regarding creating objects in Logic Machine. I'm finishing a BMS project, and this project includes three Logic Machine 5 instances. The IP addresses used for these instances are 192.168.0.12, 192.168.0.13, and 192.168.0.14.
The BMS specifications require the following:
• IP Address: Manually entered local variable.
• Alarm IP Address: Automatically entered BACNET variable. Indicates that an address is not responding to PING.
• Communications Test Frequency: Manually entered local variable. Indicates how often communications monitoring should be triggered. Selectable range: 1-23 hours.
• IP Test Enabled: Enables IP address monitoring.
• Enable KNX Test: Enables monitoring of all KNX buses.
I have no idea how to do this. I don't know if there's a way to create objects that point to IP addresses, or if it requires Lua programming.
I can include an image of what I expect to see on the screen with these variables. Thank you very much.
I have a question regarding creating objects in Logic Machine. I'm finishing a BMS project, and this project includes three Logic Machine 5 instances. The IP addresses used for these instances are 192.168.0.12, 192.168.0.13, and 192.168.0.14.
The BMS specifications require the following:
• IP Address: Manually entered local variable.
• Alarm IP Address: Automatically entered BACNET variable. Indicates that an address is not responding to PING.
• Communications Test Frequency: Manually entered local variable. Indicates how often communications monitoring should be triggered. Selectable range: 1-23 hours.
• IP Test Enabled: Enables IP address monitoring.
• Enable KNX Test: Enables monitoring of all KNX buses.
I have no idea how to do this. I don't know if there's a way to create objects that point to IP addresses, or if it requires Lua programming.
I can include an image of what I expect to see on the screen with these variables. Thank you very much.
