This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

device not booting blinking/flashing green diode
#1
My device after power off is not booting blinking/flashing green diode. I made video:
https://youtu.be/tX7dhTB9Tqk?si=OouBCXSOQooyXu8x

Top (number 1) Green diode 1 second ON and 3 seconds OFF
Reply
#2
(15.11.2023, 13:58)Jpiotr Wrote: My device after power off is not booting blinking/flashing green diode. I made video:
https://youtu.be/tX7dhTB9Tqk?si=OouBCXSOQooyXu8x

Top (number 1) Green diode 1 second ON and 3 seconds OFF
it could be SD card problem. try to reflash it, but you need Schneiders Firmware
https://openrb.com/reflash-logicmachine3...-software/
Reply
#3
Thanks AEK. Probably some issue with microSD immage. Tried W4K

Can somebody share microSD image for Wiser 4 KNX HW3.2 to load it via USB Image Tool?
Reply
#4
https://dl.openrb.com/recovery-imx6-1g.img.gz
------------------------------
Ctrl+F5
Reply
#5
(20.11.2023, 10:13)Daniel Wrote: https://dl.openrb.com/recovery-imx6-1g.img.gz


When i go to 192.168.0.10 i get
404 Not Found
nginx

LED1 constant green goes out only when LED inside casing blinks red.

https://www.youtube.com/watch?v=2QgB4WXvgx0
Reply
#6
Try clearing browser cache (as always when experiencing strange behavior)
Reply


Forum Jump: