BACnet / export object list

[BMSimon]

Hi
I have 2 questions.

We have a LM where we are exporting 1200 objects to BACnet, but sometimes some of them are not responding.
It is 600 1bit objects on/off and 600 1bit feedback objects.
Is this too much?

I could remove 50% of them and use the on/off as feedback.

Next question, is it possible to export the "objects" tab from LM? 

I need to give the CTS guys information on what state each object is and when it last changed.

Thanks in advance

Simon

[Daniel]

1. This should not be any problem for LM if all is configured correctly. What is the CPU/ID value? Is LM doing anything else?
2. Go to System-Network-BACnet objects.

[BMSimon]

1. This should not be any problem for LM if all is configured correctly. What is the CPU/ID value? Is LM doing anything else?
2. Go to System-Network-BACnet objects.

CPU/IO: 0.02 0.01 0.00, Memory: 7%
There is no scripts or anything else running on the LM.

If I go to BACnet objects there is no timestamp of when the object have last changed value.

[Daniel]

What about KNX traffic?
https://forum.logicmachine.net/showthrea...9#pid37469

[BMSimon]

What about KNX traffic?
https://forum.logicmachine.net/showthrea...9#pid37469

TP is not connected on the LM. No push buttons no sensors everything is relays controlled through BACnet.

[Daniel]

Can you try using YABE and see if you have the same result?

[BMSimon]

I'm not on site atm, I can't use YEBA over ZEROTIER can I?

It worked perfectly with the LM Sync app, but 1 line is different the the others.

Code:

"updatetime":1732811320,"id":1103,"disablelog":1,"tagcache":"","address":1103,"datahex":"01","export":1,"comment":"","name":"Indvendig lys 2.0.X - 2.0.10 C4 DISP FB","datatype":1001
"securitykey":"","updatetime":1736124424,"id":1104,"disablelog":1,"tagcache":"","readoninit":0,"address":1104,"datahex":"01","units":"","pollinterval":"","export":1,"comment":"","name":"Indvendig lys 2.0.X - 2.0.11 C1 Blå - L1 T/S","datatype":1001
"updatetime":1736124426,"id":1105,"disablelog":1,"tagcache":"","address":1105,"datahex":"01","export":1,"comment":"","name":"Indvendig lys 2.0.X - 2.0.11 C1 Blå - L1 FB","datatype":1001

Why is that? They are configured exactly the same way.

[Daniel]

No this will not work over zerotier.
It is just knx security key(empty), hard to say without the backup.

[BMSimon]

When I download the file from LM Sync
My objects are in 3 states:

"datahex":"00"
"datahex":"01"
"datahex":""

Is this:

Off
On
"Have never been switched"
?

[admin]

00 = off, 01 = on, empty = value not set yet (defaults to off/0)