Posts: 41
Threads: 13
Joined: Dec 2016
Reputation:
0
28.05.2018, 13:52
(This post was last modified: 28.05.2018, 13:58 by andrepneves@gmail.com.)
Hi every one,
I'm using "Direct input / Step +/-" for my Visu but when I input large numbers (>990) the value is changed. For example, 10000 turns to 999; 15000 turns to 14991, etc.
The data type is "09. 2 byte floating point".
Thanks in advance.
BR,
A Neves
Posts: 7768
Threads: 42
Joined: Jun 2015
Reputation:
447
2 byte float has limited precision for larger values. Use 4 bytes if possible.
Posts: 120
Threads: 40
Joined: Jun 2017
Reputation:
0
Good, I have a problem to write a value greater than 255 in a visualization. The object I want to write is floating 2 bytes, but at the moment of typing it in the visualization is which has a direct entry + or -, it only leaves me up to 255 which is due if the object is 2 bytes and can give me up More data. Try changing the data for another as 2 bytes without an integer, but the same thing keeps coming up, that is, it only lets me get to 255..
Posts: 7768
Threads: 42
Joined: Jun 2015
Reputation:
447
Check if you have Maximum value set in Visualization parameters
Posts: 120
Threads: 40
Joined: Jun 2017
Reputation:
0
Ready, I work, it's weird because I did not work from one but the various attempts and that's why I wrote in the forum, but then yes, thank you very much and happy day.
