Posts: 23
Threads: 7
Joined: Aug 2017
Reputation:
0
Hi control is working but I am get respond with timeout. why?
Command function:
Code: function tcp_oppo(data, ip, port)
local sock = require('socket').tcp()
sock:settimeout(3)
local res, err = sock:connect(ip, port or 23)
if res then
res, err = sock:send('#' .. data .. '\r')
if res then
res, err = sock:receive('*a')
else
alert('send failed: ' .. tostring(err))
end
else
alert('connect failed: ' .. tostring(err))
end
sock:close()
return res, err
end
Event:
Code: ip = '192.168.11.105'
if (event.getvalue() == true) then
res, err = tcp_oppo('POW', ip)
end
log (res, err)
Manual
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation:
447
Try adding a new line character when sending:
Code: res, err = sock:send('#' .. data .. '\r\n')
Posts: 23
Threads: 7
Joined: Aug 2017
Reputation:
0
(04.12.2018, 13:45)admin Wrote: Try adding a new line character when sending:
Code: res, err = sock:send('#' .. data .. '\r\n')
Nop it`s not hellp in logs I got the same:
Code: Event for Test 2 (32/5/1) 04.12.2018 16:36:21
* arg: 1
* nil
* arg: 2
* string: timeout
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation:
447
The remote host probably is not closing the socket after command that's why receive all (*a) is not working. You can get partial response like this:
Code: function tcp_oppo(data, ip, port)
local sock = require('socket').tcp()
sock:settimeout(3)
local res, err = sock:connect(ip, port or 23)
if res then
res, err = sock:send('#' .. data .. '\r')
if res then
res, err, partial = sock:receive('*a')
else
alert('send failed: ' .. tostring(err))
end
else
alert('connect failed: ' .. tostring(err))
end
sock:close()
return res, err, partial
end
----------------------------------
ip = '192.168.11.105'
if (event.getvalue() == true) then
res, err, partial = tcp_oppo('POW', ip)
end
log (res, err, partial)
Posts: 23
Threads: 7
Joined: Aug 2017
Reputation:
0
(04.12.2018, 14:45)admin Wrote: The remote host probably is not closing the socket after command that's why receive all (*a) is not working. You can get partial response like this:
Code: function tcp_oppo(data, ip, port)
local sock = require('socket').tcp()
sock:settimeout(3)
local res, err = sock:connect(ip, port or 23)
if res then
res, err = sock:send('#' .. data .. '\r')
if res then
res, err, partial = sock:receive('*a')
else
alert('send failed: ' .. tostring(err))
end
else
alert('connect failed: ' .. tostring(err))
end
sock:close()
return res, err, partial
end
----------------------------------
ip = '192.168.11.105'
if (event.getvalue() == true) then
res, err, partial = tcp_oppo('POW', ip)
end
log (res, err, partial)
Thanks admin its working I get 'partial'
How you think how to do to get status of device power when device will be turn on over remote that LM will know of Player status.
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation:
447
Upgrade LuaSocket package via System config > System > Packages:
https://dl.openrb.com/lm-18-imx6/pkg/lua...1_imx6.ipk
Then replace receive part with:
Code: res, err, partial = sock:receive('*r')
Posts: 23
Threads: 7
Joined: Aug 2017
Reputation:
0
(05.12.2018, 08:32)admin Wrote: Upgrade LuaSocket package via System config > System > Packages:
https://dl.openrb.com/lm-18-imx6/pkg/lua...1_imx6.ipk
Then replace receive part with:
Code: res, err, partial = sock:receive('*r')
OK that working now I get sting in res.
How do that I get status of player in KNX objekt about power status. I mean that sometime can be that player will be turn on from original remote control I need to know.
Thanks.
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation:
447
You need to send QPW command then parse the result and update status object if needed. You will need a separate resident script for that. Make sure that you don't use one object for both control and status, otherwise you can get an infinite script loop.
|