Zigbee gateway integration

[admin]

Can you post full device information window output for both devices?

[tigi]

Can you post full device information window output for both devices?

Sure, here it is:

Manufacturer: SONOFF
Model: SNZB-02LD
Firmware version: 1.1.0

Device type: End device
Power source: Battery
Receive when idle: No

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- PowerCfg (1)
- Identify (3)
- MsTemperatureMeasurement (1026)
- PollCtrl (32)
- 64599
- 64529
Output clusters
- Ota (25)

Reported attributes
- temperature: 17.20

---

Manufacturer: BOSCH
Model: RBSH-SP-ZB-EU
Firmware version: 2.5

Device type: Router
Power source: Mains
Receive when idle: Yes

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- Identify (3)
- Groups (4)
- Scenes (5)
- OnOff (6)
- SeMetering (1794)
- HaElectricalMeasurement (2820)
- HaDiagnostic (2821)
Output clusters
- Identify (3)
- Time (10)
- Ota (25)

Endpoint 242
Profile: 41440
Output clusters
- GreenPower (33)

Reported attributes
- calclevel: 0
- currentsummdelivered: 0
- haactivepower: 0
- hapowerdivisor: 1
- hapowermultiplier: 1
- onoff: false
- prevlevel: 254
- sepowerdivisor: 100
- sepowermultiplier: 1

[Tifon]

I have bought a Heiman WarningDevice-EF-3.0, which is in the supported list devices. But I only get "detection" and "low battery detected" which are not useful. Maybe is because I have a Wiser for Knx?, I have the last firmware update. Here is the info:

Manufacturer: HEIMAN
Model: WarningDevice-EF-3.0

Device type: Router
Power source: Mains
Receive when idle: Yes

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- PowerCfg (1)
- Identify (3)
- Groups (4)
- SsIasZone (1280)
- SsIasWd (1282)
- HaDiagnostic (2821)
Output clusters
- Ota (25)

Endpoint 242
Profile: 41440
Output clusters
- GreenPower (33)

Reported attributes
- detection: false

[Daniel]

SE is updating Zigbee app on its own, our list may not match what is supported by SE. Detection seems the only thing this device reports. What else would you want from this sensor?

[Tifon]

SE is updating Zigbee app on its own, our list may not match what is supported by SE.  Detection seems the only thing this device reports. What else would you want from this sensor?

It is a siren, i want to activate the siren as an alarm.

[Daniel]

OK I thought it is a smoke detector, still you should contact SE.

[stianj]

I just bought an IKEA Inspelning smart plug with energy meter. It's not in the list of supported devices, I know. But it joins just fine, and under configure I have both "RMS Voltage", "RMS Current" and "Energy delivered". All good! Except that the values don't update unless I read device status manually. Then it's updated.

Code:

Manufacturer: IKEA of Sweden
Model: INSPELNING Smart plug
Firmware version: 2.4.45

Device type: Router
Power source: Mains
Receive when idle: Yes

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- Identify (3)
- Groups (4)
- Scenes (5)
- OnOff (6)
- LevelCtrl (8)
- SeMetering (1794)
- HaElectricalMeasurement (2820)
- LightLink (4096)
- 64636
- 64645
Output clusters
- Ota (25)

Endpoint 242
Profile: 41440
Input clusters
- GreenPower (33)
Output clusters
- GreenPower (33)

Reported attributes
- calclevel: 254
- currentdivisor: 1000
- currentmultiplier: 1
- currentsummdelivered: 0.4
- hapowerdivisor: 10
- hapowermultiplier: 1
- haactivepower: 192.4
- level: 254
- onoff: true
- prevlevel: 254
- rmscurrent: 0.9
- rmsvoltage: 230.4
- sepowerdivisor: 1000
- sepowermultiplier: 1
- voltagedivisor: 10
- voltagemultiplier: 1

(And it's a bit weird with dimming properties on a on/off socket - but that's not really a problem)

[tigi]

I just bought an IKEA Inspelning smart plug with energy meter. It's not in the list of supported devices, I know. But it joins just fine, and under configure I have both "RMS Voltage", "RMS Current" and "Energy delivered". All good! Except that the values don't update unless I read device status manually. Then it's updated.

Code:

Manufacturer: IKEA of Sweden
Model: INSPELNING Smart plug
Firmware version: 2.4.45

Device type: Router
Power source: Mains
Receive when idle: Yes

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- Identify (3)
- Groups (4)
- Scenes (5)
- OnOff (6)
- LevelCtrl (8)
- SeMetering (1794)
- HaElectricalMeasurement (2820)
- LightLink (4096)
- 64636
- 64645
Output clusters
- Ota (25)

Endpoint 242
Profile: 41440
Input clusters
- GreenPower (33)
Output clusters
- GreenPower (33)

Reported attributes
- calclevel: 254
- currentdivisor: 1000
- currentmultiplier: 1
- currentsummdelivered: 0.4
- hapowerdivisor: 10
- hapowermultiplier: 1
- haactivepower: 192.4
- level: 254
- onoff: true
- prevlevel: 254
- rmscurrent: 0.9
- rmsvoltage: 230.4
- sepowerdivisor: 1000
- sepowermultiplier: 1
- voltagedivisor: 10
- voltagemultiplier: 1

(And it's a bit weird with dimming properties on a on/off socket - but that's not really a problem)

Hi,

Have you tried rejoining it to the zigbee network, that helped for me.

Greetz,
Tigi

[admin]

Voltage/current/power reporting won't work without a profile. Some devices will report values automatically but most devices won't send reports unless the gateway subscribes to them.

[stianj]

Yeah, I suspected so. So... will you pretty please consider adding it in the next version..?