This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.
Logic Machine Forum › LogicMachine eco-system › Gateway v
1wire to LM5Lite

Threaded Mode
1wire to LM5Lite
costelservice@gmail.com Offline
Junior Member
Posts: 3
Threads: 1
Joined: Jan 2019
Reputation: 0
#1
28.01.2019, 17:27 (This post was last modified: 28.01.2019, 17:35 by costelservice@gmail.com.)
Hello!
I have a LM5Lite and a KNX home automation. I want to expand the network and use a few 1wire temperature sensors. I want the temperature at one of the sensors to be displayed on the knx thermostat display as well as the outside temperature.
I found various rs232 to 1wire adapters.
Is it possible to use an adapter? Can you help me with some advice?

[i]Thanks!![/i]
Find
Reply
Daniel Offline
Administrator
Posts: 4643
Threads: 24
Joined: Aug 2017
Reputation: 207
#2
29.01.2019, 10:42
Hi
The easiest for you would be just getting LM with 1 wire like this one
http://openrb.com/logicmachine5-power-dw1
BR
------------------------------
Ctrl+F5
Find
Reply
admin Offline
Administrator
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation: 447
#3
29.01.2019, 10:43
USB<>1-Wire bridge DS9490R is also supported
Find
Reply
DutchPartners Offline
Junior Member
Posts: 2
Threads: 0
Joined: Mar 2016
Reputation: 0
#4
24.10.2020, 12:02
(29.01.2019, 10:43)admin Wrote: USB<>1-Wire bridge DS9490R is also supported

Is there an example script available to read 1-wire sensors in use of the usb converter?
Find
Reply
admin Offline
Administrator
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation: 447
#5
27.10.2020, 08:10
You need to install some additional packages to have USB 1-Wire support. Which hardware and firmware are you using?
Find
Reply
ferrim Offline
Junior Member
Posts: 38
Threads: 6
Joined: Jul 2015
Reputation: 0
#6
27.10.2020, 09:05
(27.10.2020, 08:10)admin Wrote: You need to install some additional packages to have USB 1-Wire support. Which hardware and firmware are you using?
Interesting thread,
I have a LinkUSB 1-Wire interface and I would like to use it with a LM5p2-KC and latest firmware.
I stay listening...
Find
Reply
DutchPartners Offline
Junior Member
Posts: 2
Threads: 0
Joined: Mar 2016
Reputation: 0
#7
27.10.2020, 19:14
(27.10.2020, 08:10)admin Wrote: You need to install some additional packages to have USB 1-Wire support. Which hardware and firmware are you using?

I am using the schneider homelynk with firmware version 2.5.1 will this also supported?
Find
Reply
sjfp Offline
Member
Posts: 99
Threads: 39
Joined: Apr 2018
Reputation: 0
#8
15.11.2021, 11:40
(27.10.2020, 19:14)DutchPartners Wrote:
(27.10.2020, 08:10)admin Wrote: You need to install some additional packages to have USB 1-Wire support. Which hardware and firmware are you using?

I am using the schneider homelynk with firmware version 2.5.1 will this also supported?

Hi looking for info on what package's need adding to LM5 Lite runing on i.MX6 to get USB 1-Wire support, would also like to know if this could also be used on SE's C-Bus Nac/Shac's i.MX28
Find
Reply
admin Offline
Administrator
Posts: 7758
Threads: 42
Joined: Jun 2015
Reputation: 447
#9
15.11.2021, 12:48
For LM5 install libow, owserver, luaow and genohm-scada-w1 packages from here: https://dl.openrb.com/lm-21-imx6/pkg/
For C-Bus version you can try packages from here https://dl.openrb.com/lm-21-mxs/pkg/
You won't be able to use the UI but you can read values via a script. Some examples:
https://forum.logicmachine.net/showthread.php?tid=301
https://forum.logicmachine.net/showthread.php?tid=3126
Find
Reply


Forum Jump: