Zigbee gateway integration

[fleeceable]

I am working on with my own flutter app right now. Is there any way I can open network state via lua script?
I use LM as Zigbee, KNX, Modbus, Bacnet gateway. Would be good if I can get somehow list of Zigbee devices and open/close network to add some new devices. LM and app communicates over MQTT so I can send data to my app quite easily.

[Rune]

Was it a dream or did I see a list of Zigbee products that is compatible with LM5? Can't find the link. :|

[admin]

This is the list: https://openrb.com/docs/zigbee-devices.htm

[esteve.budia]

Maximum paired devices limit reached: 15
Any hint to pair more devices with the cc2531 ?

[Daniel]

We tested this chip and it will fail completely if you do more. Not enough memory. With our new interface you will be able to do 50

[esteve.budia]

We tested this chip and it will fail completely if you do more. Not enough memory. With our  new interface you will be able to do 50

thx!!

[Rune]

We tested this chip and it will fail completely if you do more. Not enough memory. With our new interface you will be able to do 50

Can you tell us a little bit more about this new interface?

[admin]

New interface uses RS232 instead of USB because it's more robust and allows longer cable length. It uses newer chip with more memory so it can handle more nodes on the network. It also has an external antenna connector so the signal range is also improved.

[CarlS]

Hello,

Is it possible to add this dimmer from Micro Matic MicroDim ZB250?
I can turn on/off and set value, but status is not reported


Manufacturer: Micro Matic Norge AS
Model: SZ1000

Device type: Router
Power source: Mains
Receive when idle: Yes

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- Identify (3)
- Groups (4)
- Scenes (5)
- OnOff (6)
- LevelCtrl (8)
- SeMetering (1794)
- HaElectricalMeasurement (2820)
- HaDiagnostic (2821)
- LightLink (4096)
Output clusters
- Ota (25)

Endpoint 242
Profile: 41440
Input clusters
- GreenPwr (33)
Output clusters
- GreenPwr (33)

Reported attributes
- rmscurrent: 0
- rmsvoltage: 1108



   

Thanks
Carl

[Zen]

Hi everyone,
Is the newest RS-232 interface available at the market? Is it ready?
---
Does someone has ever tried this? --> MHCOZY 1 Channel 5-12V (Example link: https://www.amazon.com/MHCOZY-Adjustable...B08X218VMR)
is there anyway you can add the profile of this device?

Thanks for your time,
BR.

[emme]

Hi.. willing to know if there is a roadmap to integrate the following:

Xiaomi RTCGQ01LM motion sensor
Xiaomi MCCGQ01LM reed sensor
Eurotronic SPZB0001 TRV valve

Or.. is there a way to create personal profiles for unsupported devices?
I do have a few of them and they work good...
Thanks
M

[admin]

@Zen, it should work out of the box but it might have some incompatibilities or other issues.
The first small batch of RS-232 gateways will be ready soon.

@emme, be careful with Xiaomi devices as they sometimes have non-standard behavior. If possible, choose a different manufacturer.
We've tried making Eurotronic SPZB0001 TRV valve work with LM but gave up because it's very buggy.

[Zen]

@Zen, it should work out of the box but it might have some incompatibilities or other issues.
The first small batch of RS-232 gateways will be ready soon.

I'll try this upcoming days and let you know. I'll post the profile when i'll import it in the system.

Let me know here or via PM where we could buy and if we can pre-order the newest gateways.

[Kolargol]

Will the RS-232 gateway also work for Wiser4KNX?

[admin]

@Zen Send us an e-mail for more info.
@Kolargol Yes, it will be compatible.

[CarlS]

Hello,

Is it possible to add this dimmer from Micro Matic MicroDim ZB250?
I can turn on/off and set value, but status is not reported


Manufacturer: Micro Matic Norge AS
Model: SZ1000

Device type: Router
Power source: Mains
Receive when idle: Yes

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- Identify (3)
- Groups (4)
- Scenes (5)
- OnOff (6)
- LevelCtrl (8)
- SeMetering (1794)
- HaElectricalMeasurement (2820)
- HaDiagnostic (2821)
- LightLink (4096)
Output clusters
- Ota (25)

Endpoint 242
Profile: 41440
Input clusters
- GreenPwr (33)
Output clusters
- GreenPwr (33)

Reported attributes
- rmscurrent: 0
- rmsvoltage: 1108





Thanks
Carl

Hello,

I just wonder if my question is noticed

Carl

[admin]

@CarlS, support for your device will be added in the next firmware. You will have to reset it and pair again for all features to work.

[watamat]

Hi!

Please add support for this device: Aqara SSM-U02
Switching from ZigBee app works fine but LM object status does not affect the device.

Code:

Manufacturer: LUMI
Model: lumi.switch.l0agl1

Device type: End device
Power source: Battery
Receive when idle: No

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- DeviceTempCfg (2)
- Identify (3)
- Groups (4)
- Scenes (5)
- OnOff (6)
- Alarms (9)
Output clusters
- Time (10)
- Ota (25)

Endpoint 242
Profile: 41440
Output clusters
- GreenPwr (33)

[admin]

Support for Aqara SSM-U02 will be added in the next version.

[simone.muscat]

Hi,

I am testing Ledvance RGBW lights and the Lighting Colour cannot be changed. ON/OFF dimming and light levels work fine. Would it be possible to add support for this device? 

Manufacturer: LEDVANCE
Model: PAR16S RGBW

Device type: Router
Power source: Mains
Receive when idle: Yes

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- Identify (3)
- Groups (4)
- Scenes (5)
- OnOff (6)
- LevelCtrl (8)
- LightingColorCtrl (768)
- HaDiagnostic (2821)
- LightLink (4096)
Output clusters
- Ota (25)

Endpoint 242
Profile: 41440
Output clusters
- GreenPwr (33)